Call Cycles - Motorola CB300-D User Manual

CALL CYCLES

The total Call Cycles refer to the repeating RF broadcasts that will occur when the call button (or
aux) button is activated. The system will automatically clear an active call when the Total Call
Cycle value is reached. System Default: 2 cycles
Call Cycles?
Old: 2 cycles
New: 2 cycles
NOTE:
Special Menus must be enabled to view this selection.
Press the or button until the Call
Cycles? menu is shown. Press the
button to begin the next step.
Use the or buttons to increase/de-
crease the Call Cycle selection. The range is
1-30 cycles.
Press-and-Hold the
increments.
ENTER
Press to select the new Call Cycle, or
to exit without any changes.
ENTER
or button for faster
35