QUICK START Click the power button once to turn the device on or off. After clicking the power button, the LED light will turn white, indicating that the device is on. Once the device has turned on, the light will change from white to purple.
USING DEVICE There are three temperature settings featured in the Atom device. The first temperature of 360F, is represented by a blue light, the second temperature of 410F, is represented by a yellow light, and lastly, the third temperature of 464F, is represented by a red light. If the lowest temperature is not of your liking, you can easily change temperatures by holding the power button for two seconds.
NOTE: The Atom offers a unique feature in which users can shake the device once they have chosen their preferred temperature and would like to return to heating mode. BATTERY LIFE Not only are the LED lights responsible for indicating the temperature of the device, they also represent the battery levels of the device.
Page 7
NOTE: To preserve battery life, the device will enter standby mode after 30 seconds without use. While in standby mode, the device lowers the temperature, but still remains in heating mode and is ready for use. This mode is represented by a white LED light. The device will automatically turn off after two minutes without use.
Page 8
WARNING Do not attempt to modify equipment; doing so can result in permanent damage, overheating and/or explosion which may lead to severe injuries or death. For more information visit: vaporfi.com/how-it-works...
Page 9
DISCLAIMER Vaporfi products are not smoking cessation products and have not been tested as such. The U.S. FDA has not approved these products for any use and they are not intended to diagnose, cure, mitigate, treat or prevent any disorder, disease, or physical or mental condition.
INICIO RÁPIDO Haga clic en el botón de encendido una vez para activar el dispositivo de encendido o apagado. Después de pulsar el botón de encendido, la luz LED se volverá blanca, lo que indica que el dispositivo está encendido. Una vez que el dispositivo se ha activado, la luz cambiará...
USO DEL DISPOSITIVO Hay tres ajustes de temperatura que aparecen en el dispositivo Atom. La primera temperatura es de 360F, está representado por una luz azul, la segunda temperatura de 410F, está representado por una luz amarilla, y, por último, la tercera temperatura de 464F, que está...
Una vez que la luz LED se ilumina en verde, inhale directamente de la boquilla. NOTA: El Atom ofrece una característica única en la que los usuarios pueden agitar el dispositivo, una vez que han elegido su temperatura preferida, y les gustaría regresar al modo de calefacción.
Page 16
batería del dispositivo. La luz verde significa que el dispositivo tiene la batería llena, la amarilla indica la batería parcial, mientras que la roja significa que el nivel de la batería es bajo y el dispositivo se debe cargar. Durante la carga, el dispositivo mostrará una luz LED azul.
Page 17
PUERTO USB BOTON DE ENCENDIDO BOQUILLA LUZ LED...
Page 18
ADVERTENCIA No intente modificar el equipo; hacerlo puede resultar en daño permanente, sobrecalentamiento y/o una explosión que puede provocar lesiones graves o la muerte. Por más información visite: vaporfi.com/how-it-works...
EXENCIÓN DE RESPONSABILIDAD Los productos Vaporfi no son productos para dejar de fumar ni se han probado como tales. La FDA de los EE .UU. no ha aprobado estos productos para ningún uso ni están indicados para diagnosticar, curar, mitigar, tratar o prevenir cualquier trastorno, enfermedad, o condición física o mental.