Motorola Telario TS3000 Installation Manual
Motorola Telario TS3000 Installation Manual

Motorola Telario TS3000 Installation Manual

Integrated cordless telephone and two-way radio system

Advertisement

Quick Links

Introduction
Regulatory Approvals
FCC
November, 1999
Congratulations! You have chosen the Motorola Telario™ Integrated Cordless
Telephone and Two-Way Radio System. The Telario System is a state of the art
Motorola digital communications system. This product family of 1.9 GHz unli-
censed wireless communication equipment is intended for businesses with
groups of in-building users. The system supports two types of handsets and
utilizes TDMA Control Stations that allow integrated voice services to several
communications groups. With Motorola's seamless integration of two-way
dispatch services – Group Talk and Private Link, and Full Duplex (toll quality)
Cordless Telephone capability – your customer will experience an efficient and
productive work environment.
The TS3000 Telario Control Station complies with Part 15 and 68, FCC rules.
FCC Registration Number: ABZ99FT7012
Ringer Equivalence Number:
This equipment complies with Part 15 and 68 of the FCC Rules. On the bottom
of the TS3000 Control Station are labels that contain, among other information,
the FCC Registration Number and Ringer Equivalence Number (REN) for this
equipment. If requested, this information must be given to the telephone com-
pany.
The REN is useful to determine the quantity of devices you many connect to
your telephone line and still have all of those devices ring when your number
is called. In most, but not all, areas, the sum of the RENs of all devices con-
nected to one line should not exceed five (5.0). To be certain of the number of
devices you many connect to your line, as determined by the REN, you should
contact your local telephone company to determine the maximum REN for
your calling area.
If your telephone equipment causes harm to the telephone network, the tele-
phone service may discontinue your service temporarily. If possible they will
notify you in advance. But if advance notice isn't practical, you will be notified
as soon as possible. You will be informed of your right to file a complaint with
the FCC.
Your telephone company may make changes in its facilities, equipment, oper-
ations or procedures that could affect the proper functioning of your equip-
ment. If they do, you will be notified in advance to give you an opportunity to
maintain uninterrupted telephone service.
If you experience trouble with this equipment, please contact your authorized
Motorola dealer for information on obtaining service or repairs. The telephone
company may ask that you disconnect this equipment from the network until
the problem has been corrected or until you are sure the equipment is not mal-
functioning.
This equipment has been tested and found to comply with the limits for Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
6880906Z38-O
MOTOROLA
Telario Installation Manual
-1

Advertisement

Table of Contents
loading

Summary of Contents for Motorola Telario TS3000

  • Page 1 Congratulations! You have chosen the Motorola Telario™ Integrated Cordless Telephone and Two-Way Radio System. The Telario System is a state of the art Motorola digital communications system. This product family of 1.9 GHz unli- censed wireless communication equipment is intended for businesses with groups of in-building users.
  • Page 2: Underwriter's Laboratories (Ul)

    It also works to eventually move all micro- wave users out of the UPCS band. Motorola was a founding member of the organization and continues to be actively involved. Zone 1, Zone 2, & Zone 3 Unclassified...
  • Page 3 Telario TS3000 Control Station Installation Manual An Unclassified or Zone 3 county is one that qualifies for Zone 1 status. How- ever, due to a business population being less than 5,000, it has not been sched- uled for conversion at this time. Most Unclassified counties will be automatically converted to Zone 1 Status by UTAM when a member initiates a site specific coordination request, with conversion costs to be paid by UTAM.
  • Page 4 Time of Installation, Product Registration & LVP: All Zones To monitor deployment and power levels, all equipment sales must be regis- tered with Motorola Product Services group at the time of installation. Infor- mation is forwarded to UTAM, per its regulations. This procedure, required for all zones, ensures that the band remains coordinated and operational for all authorized vendors and their customers.
  • Page 5 Use of the random hardware serial number and authorization key assures that the Location Verification Process (LVP) is specific to each unique system each time the LVP is used. The Motorola Product Services Group submits applica- tion and registration information to UTAM on a weekly basis. This informa- tion will also be kept on the database at Motorola.
  • Page 6: Important Safety Information

    For safe and efficient operation observe these guidelines. Information Exposure to Radio Your Motorola Telario Control Station and handsets, which generate and radi- Frequency Energy ate radio frequency (RF) electromagnetic energy (EME), are designed to com- ply with the following national and international standards and guidelines...
  • Page 7: Operational Cautions

    Replace a damaged antenna or board immediately or contact your Motorola dealer or the Motorola Service Repair Center. Unauthorized antennas, modifications, or attachments could damage the Con- trol Station and may violate UTAM regulations. Use only the Motorola approved antenna or antenna board. General Control Station Your Control Station is made and tested to meet exacting safety standards.
  • Page 8 Telario TS3000 Control Station Installation Manual Power receptacles that are controlled by switches or timers should not be used. Power-Cord Protection – Route power-supply cords so they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, AC outlets, and the points where they exit from the product.
  • Page 9: System Components

    Telario TS3000 Control Station Installation Manual System Components • Telario TS3000 Control Station • Telario TC3000 Communicator • Telario TR3000 Radio TS3000 Control Station TC3000 Communicator TR3000 Radio November, 1999 6880906Z38-O...
  • Page 10: Standard Shipping Package Inspection

    Telario TS3000 Control Station Installation Manual Standard Shipping • Trunnion Kit – Kit Number HLN9789 Package Inspection • Power Supply – Part Number 2580427B06 • Line Cord – Part Number 3085714L01 • Installation Manual - Part Number 6880906Z38 Control Station Profile LED Definitions...
  • Page 11: Installation

    Telario TS3000 Control Station Installation Manual Installation Telario installations follow a seven-step process, starting with a pre-sale site survey and ending with training users working on a tested system. Pre-Sale Site Survey The first thing you need to do is visit your customer’s site, verify that a Telario system will meet the customers’...
  • Page 12 Telario TS3000 Control Station Installation Manual glassed doorways and window areas will usually provide sufficient signal strength to the area. Important Guidelines Here are some important guidelines that you will want to keep in mind when preparing to install a Telario System.
  • Page 13 Telario TS3000 Control Station Installation Manual Telephone System Interfaces An integral part of the pre-install site survey involves looking over the custom- ers telephone system. The Telario System must interface with analog phone lines. This was a delib- erate design decision that provides you with as much flexibility as possible in matching the Telario System to a customer’s telephone environment.
  • Page 14 Control Station are about 12 feet long. If a greater distance is necessary to reach AC power, one or more Motorola 75 foot Power Extension Cables may be con- sidered. The number of extension cables used depends on the type of Control Station being installed as well as expected system usage or “loading”.
  • Page 15: Installation Preparation And Programming

    Remote Mount Antenna If you must mount the Control Station in a vertical orientation, coverage could be restricted significantly. For these cases, we suggest using the Motorola Remote Mount Antenna. The Remote Mount Antenna connects to the rear of the Control Station, extending the space diversity antenna system up to four feet, thus allowing for more flexible mounting options, while maintaining sys-...
  • Page 16 Control Station has a built in mobility feature intended to satisfy the UTAM requirement that a previously installed system shall not be moved to a different location without being re-registered by an authorized Motorola dealer. Due to this requirement, just prior to or just after the Control Station is actually installed, the Telario Management Tool (TMT) Software must be used to indi- cate that a particular Control Station has in fact been registered.
  • Page 17: Site System Test

    Telario TS3000 Control Station Installation Manual primary AC power is restored during the battery backup period, the Con- trol Station will remain functional. If power is still out when the battery backup is discharged, the Control Station will be functional when primary AC power is restored provided that primary power was not lost for more than five days, and the connection to phone line 1 was maintained during...
  • Page 18 Telario TS3000 Control Station Installation Manual 6880906Z38-O November, 1999...

Table of Contents