Bosch ISC-BDL2-W12 Installation Manual

Blue Line Gen2
TriTech Motion Detector
ISC-BDL2-W12
en Installation Guide
ISC-BDL2-W12H (10.588 GHz)
ISC-BDL2-W12G (10.525 GHz)
Optional Brackets:
B328, B338, B335
1
1
2
© 2017 Bosch Security Systems, Inc.
2,2 m - 2,75 m
(7.5 ft - 9 ft)
Recommended:
2,2m (7.5 ft)
Changes or modifications not expressly approved
by Bosch Security Systems, Inc. can void the user's
authority to operate the equipment.
UL/C-UL
Perform Walk Test at least once a year.
Use only a Listed limited-power source.
The Listed control unit or a Listed burglary power
supply must provide 4 hours (40 mAh) of standby
power.
Install the unit in accordance with National Electrical
Code NFPA 70 and Part 1 of the Canadian Electrical
code CSA C22.1.
Adjust the microwave range control, if necessary, to
achieve maximum range.
SELV
Connect all wiring to a safety extra-low voltage (SELV)
circuit only.
IP30 IK04 (EN 60529, EN 62262)
För svensk installationsanvisning se www.boschsecurity.se.
2
Ligue todas as cablagens apenas a um circuito de
segurança de tensão extra baixa (SELV).
Conecte el cableado únicamente a un circuito
de seguridad para voltajes muy bajos (SELV).
Alle Drähte sind ohne Ausnahme an Niederspannung
anzuschließen.
3
Sluit alle bedrading uitsluitend aan op een circuit met
een extra lage veiligheidsspanning.
Prenez soin de connecter tous les câbles à un circuit à
très basse tension de sécurité (TBTS).
Collegare tutti i cavi esclusivamente a un circuito SELV
(circuito di sicurezza a bassissima tensione).
-30°C to +55°C
(-20°F to +130°F )
UL Listed installations,
the temperature
range is 0°C to +49°C
(+32°F to +120°F)
0 - 95% Relative Humidity
(0 - 85% UL/C-UL Installations)
4
F.01U.140.813 | 10 | 2017.12 | 1