Remote Raise/Lower - Philips Lytemode 2-Button Remote Station User Manual

Remote RAISE/LOWER

Provides control for up to 16 Lytemode Masters (or separate IDs).
In this configuration, the station can be used as
either a Master Raise/Lower or a Channel
Raise/Lower device. In the Raise/Lower
mode, the top button sends the Raise
command, while the bottom button will send
the Lower command. Both the top and bottom
button LEDs will illuminate dimly. Pressing
either button will cause it to illuminate at full
brightness.
To program:
Step 1. Press and hold TOP and BOTTOM
buttons for 10 seconds. (Both LEDs will start to blink.)
Step 2. At each Master or Mini-Master station (up to 16), press
All Raise/Lower or Channel Raise/Lower as required.
Step 3. At 2-Button Remote Station, press TOP button to accept
or press BOTTOM button to abort.
While in program mode, pressing an All Raise/Lower or
Note:
Channel Raise/Lower on a Lytemode Master will automatically
program both buttons on the 2-button keypad.
8
Programming
RAISE
LOWER