Chapter 2 Preparations
Installing the flash backup unit
1.
Install the flash backup unit to this server with one screw and fixing bracket provided with the
flash backup unit.
Connecting to a RAID controller
1.
Connect another connector of the flash backup unit control cable to the RAID controller. Check
the marker of the connector and connect the cable straight into the connector. Be careful not to
press it in at an angle when connecting.
Position of the connector
Connect the cable to the connector shown in the figure below.
48
Important
Make sure that the battery bracket is correctly attached to the server.
Tips
For the position of the connector of N8103-206/207/208, refer to the manual
attached to N8103-206/207/208.
Black Marker
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
RAID Controller