Table of Contents
Advertisement
Image Adjust
1
Press the MENU button to display On-Screen Menu. Spin
the menu icons with the Control pad and press the SELECT
button when the IMAGE ADJ. icon comes right in front.
2
Move the yellow frame pointer with the Control pad to an
item which you want to adjust.
3
Press the SELECT button to display an adjustment dialog
box. Adjust value with the Control pad.
Contrast
Decrease or increase contrast with the Control pad.
(From 0 to 63.)
Brightness
Adjust image darker or brighter with the Control pad.
(From 0 to 63.)
Color
Lighten or deeper color with the Control pad.
(From 0 to 63.)
Tint
Adjust with the Control pad to obtain proper color.
(From 0 to 63.)
Color management
The Color management function enables you to adjust color level,
phase and gamma of the selected spot of the projected image and
exchange the original color with the adjusted one.
The projector can store up to eight color management data.
Color selection
Press the SELECT button when Color management is
highlighted and then Color management pointer will appear.
Move the pointer to a spot which you want to adjust the color
of with the Control pad, and press the SELECT button. The
image being projected freezes and Color Selection window will
appear.
X-axis of COLOR pallet shows Phase and Y-axis, Level.
Select a level and phase which you prefer with the Control pad
and press the SELECT button to move the pointer to GAMMA.
Select a position of GAMMA which you prefer with the Control
pad and press the SELECT button.
While adjusting COLOR and GAMMA, the projected image
color will change accordingly.
✔
Note:
• Color and Tint cannot be displayed when PC input source is selected.
• Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL-N.
(p40)
adjusts Contrast, Brightness, Color, Tint, Color management, Auto picture
control, Color temp., Red, Green, Blue, Sharpness, Gamma, Noise reduction,
Progressive, Film, and selects Reset and Store.
Image Adjust Menu
Color selection
Image Adjustment
IMAGE ADJ. icon
Pointer
(yellow frame)
Softly tap the Control
pad or grind your
finger on the Control
pad to move the
pointer.
Indicates the other
items exists below.
Item data
Adjust value with the
Control pad.
Color management pointer
Move the pointer to a spot which you
want to adjust the color of and then
press the SELECT button. Color
Selection window will appear as
below.
Pointer
(red frame)
45
Advertisement
Table of Contents
