Table of Contents
Advertisement
4
Click Search button to list up the available IP address assign to the projector and
select desired IP address you use, or you can enter the IP address manually if you
know that IP address.
5
Set the quality of the image.
Quality: Selects from High, Mid, Low
Image Magnification: If checked, the screen image size of the computer is automatically
6
Click OK button to close the setting window.
About Image Quality
Quality : Quality mode of the captured image shows following JPEG compression mode.;
High
: JPEG low compression mode
Mid
: JPEG medium compression mode
Low
: JPEG high compression mode
[1] Control by the computer
Project this screen
PC1
PC2
image with PJ2.
* PC privided with the Network Capture.
PC3
PC4
Select input mode to the "Network" previously.
1
Click Network Capture icon on the task bar.
2
Click "Start" on the popup menu.
The captured screen image of the computer will appear
on the projected screen.
* If the error message appears, check "Parameter
Determination" described on the previous page.
3
To stop capturing, click "Stop" on the popup menu.
adjusted to the projector's screen size.
Capture
Internet
Intranet
PJ2
PJ1
PC5
In the standby
Icon on the task bar
Network Capture
* Start capturing from
the computer.
In capturing
Network Unit
OWNER'S MANUAL
61
Advertisement
Table of Contents
