Rear Panel - Sanyo DVC-2600 Instruction Manual

Rear Panel

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
(VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor,
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
RF OUT(DVD/VCR OUT)
Connect to a TV with RF coaxial inputs.
ANTENNA INPUT
Connect the VHF/UHF/CATV antenna to this terminal.
10
COMPONENT VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
VHS IN LINE 1
Another VCR).
AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV, amplifier, receiver, or stereo system.
DIGITAL AUDIO OUT (COAXIAL) (DVD OUT)
Connect to digital (coaxial) audio equipment.
Plug into the power source.
Video Output Select Switch
Select either S-VIDEO OUT or COMPONENT
VIDEO OUT, depending on how you connected the
DVD+VCR to the TV.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
AC Power Cord