Key Features 1. Earpiece lets you hear the caller and automated prompts. 2. Main LCD (display) displays all the information needed to operate your phone, such as the call status, the Contacts list, the date and time, and the signal and battery strength. 3.
Page 12
15. Side Volume Key allows you to adjust the ringer volume in standby mode or adjust the voice volume during a call. To mute the ringer during an incoming call, press the volume key up or down. The volume key can also be used to scroll up or down to navigate through the different menu options.
Viewing the Display Screen This list identifies the symbols you’ll see on your display screen. indicates your current signal strength. The more lines you have, the stronger your signal. means your phone cannot find a signal. indicates the call is on hold. indicates a call is in progress.
Page 14
indicates the handset is discoverable by another Bluetooth device. indicates the handset is communicating with a Bluetooth device. indicates your access to a secure site. shows the level of your battery charge. The more black you see, the more power you have left. (The icon is animated while the battery is charging.) indicates your battery is charging in “Power Off”...
Turning Your Phone On and Off Turning Your Phone On Press and hold Once your phone is on, it displays “Looking for service...” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode. At this point, you are ready to begin making and receiving calls.
Using the Battery Installing the Battery 1. Insert the battery into the opening on the back of the phone and gently press down. 2. Place the battery cover into the position as indicated in the diagram, and slide it until you hear it snap into place. Then, slide the battery release latch.
Charging the Battery Your phone comes with a rechargeable battery. You should charge the battery as soon as possible so you can begin using your phone. Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off and you will lose all the information you were just working on.
Navigating Through Phone Menus The navigation key on your phone allows you to scroll through menus quickly and easily. To navigate through a menu, simply press the navigation key up or down. If you are in a first-level menu (after selecting an item in the main menu), you may also navigate to the next or previous first-level menu by pressing the navigation key right or left.
Displaying Your Phone Number > Settings > Phone Info > My Phone#. (Your phone Select number and other information about your phone will be displayed.) Tip: You can also display your phone number through the Contacts menu. Select > Contacts > My Name Card .
Dialing Options Dialing options are displayed when you press softkey) after entering numbers in standby mode. Abbrev. Dial to use the Abbreviated Dialing feature. (See “Setting Abbreviated Dialing” on page 43 and “Using Abbreviated Dialing” on page 21.) Call to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode.
Answering Calls To answer an incoming call: 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2. Press to answer an incoming call. Your phone notifies you of incoming calls in the following ways: The phone rings and/or vibrates.
Setting Answer on Hold This feature allows you to hold an incoming call when you cannot answer immediately. To set Answer on Hold: When you receive an incoming call, press softkey) > Answer on Hold. (The caller hears a message while waiting for you to answer. will display on the screen while the call is on hold.) To resume the call: Press...
Calling Emergency Numbers You can place calls to 911 (dial even if your phone is locked or your account is restricted. Once the connection is established, press display 911 options: Speaker On to activate speakerphone mode. (If you are in speakerphone mode, the option will appear as Speaker Off to deactivate.) Unlock Phone to unlock your phone (appears only if the phone...
In-Call Options During a call, your phone displays menu options by pressing Options (right softkey). Flash to answer an incoming call while putting the current call in Call Waiting or connect a third party for a Three-Way Call. Mute or Unmute to mute or reactivate your phone’s microphone.
End-of-Call Options To display the following options, press within 10 seconds after disconnecting a call. Call Again to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode. Send Text to send a text message. Tip: You can also choose to send a message by pressing softkey).
Saving a Phone Number Your phone can store up to seven phone numbers in each of 200 Contact entries with up to 500 total numbers. Each entry’s name can contain 32 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see “Using Contacts”...
Dialing and Saving Phone Numbers With Pauses You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or credit card billing numbers. There are two types of pauses available on your phone: Hard Pause to send the next set of numbers when you press 2-Sec.
Dialing from the Contacts List 1. Select > Contacts > Find/Add Entry. 2. Select the entry you want to call and press 3. Highlight the number you wish to call and press Note: The icon next to each entry represents the labels (for example, Mobile, Home, Work, etc.) of the entry’s default phone number.
Using Abbreviated Dialing Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated dialing features. Contacts Match to retrieve any desired number saved in your Contacts by entering only the last three to six digits of the number.
Entering Text Selecting a Character Input Mode Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when sending text messages). 1. When you display a screen where you can enter text, press Mode (right softkey).
Tip: Before entering text, press to change letter capitalization style Shift > > (Alphabet Mode) > > (T9 Text Input Mode). Entering Characters Using T9 Text Input T9 Text Input lets you enter text in your phone with just one keypress per letter.
Customizing the T9 Settings 1. Press Mode (right softkey) > Text Options > T9 Settings. – or – From standby mode, select T9 Settings. 2. Select an option and press Word Prediction to automatically display the word that may follow the current text input. Word Completion to show the completed words that match the keys you have entered without entering the whole word.
Characters scroll in the following order: English Sequence Upper Case Lower Case . , @ 1 ? ! A B C 2 a b c 2 D E F 3 d e f 3 G H I 4 g h i 4 J K L 5 j k l 5 M N O 6...
2. Your Phone’s Settings Sound Settings Ringer Types Selecting Ringer Types for Incoming Calls Select a ringer type for incoming calls so that you can recognize when a certain type of call is coming in: To select a ringer type for incoming calls: 1.
Adjusting the Phone’s Volume Settings Adjusting the Ringer Volume 1. Select > Settings > Sounds > Volume > Ringer. 2. Select a volume level and press Tip: You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by using You can make the ringer vibrate at any volume level by checking the Always Vibrate box next to...
Selecting Vibrate Type With this feature, you can select vibrate type for incoming calls, messages, and schedule alarms. 1. Select > Settings > Sounds > Vibrate Type. 2. Select Incoming Calls, 10-4 ,Voicemail, Messaging, or Calendar/Alarm. The following items require an additional step: Incoming Calls: select With Caller ID or No Caller ID.
Setting Up Key Press Echo With this feature, you can hear a voice say the numbers when you press the keypad. This feature is available when you are in standby mode. 1. Select > Settings > Sounds > Others > Key Press Echo. 2.
3. Select a setting and press Tip: You can select Once Repeat Alert Repeat Alert Missed, Voicemail or Messaging. minutes for twenty minutes. (For 10-4 calls, an alert sounds continuously.) Silence All Press down repeatedly in standby mode. (The screen will display “Silence All.”) To deactivate, press volume level.
Display Settings Changing the Phone’s Menu Style Your phone allows you to choose how the main menu appears on your display screen. 1. Select > (right softkey) > Change View. Options 2. Select Grid View or List View. Grid View to view each main menu item as an animated single-screen icon.
Power Save Mode This feature helps conserve your battery power by setting the Main LCD backlight to “Dim Only,” the keypad backlight to "Always Off" and the Main LCD sleep mode to “after 5 sec.”. 1. Select > Settings > Display > PWRsave Mode. 2.
Changing the Contrast You can adjust your screen's contrast (brightness) to suit your surroundings. To adjust the display’s contrast: 1. Select > Settings > Display > Contrast. 2. Select an option (Highest, High, Medium, Low, or Lowest) and press Changing the Display Screen Animation Your new phone offers animation for what you see on the display screen during various phone functions.
Changing the Clock/Calendar Display for Standby Mode Select from among a variety of items to be displayed in standby mode. To set the clock/calendar display for standby mode: 1. Select > Settings > Display > Clock/Calendar. 2. Select a display option and press Setting Return to Standby Mode 1.
Seek & Find Business Tracking Services e9-1-1 This cell phone is not intended to operate as a GPS satellite receiver. e9-1-1 services that use Assisted GPS are not currently available. While these services are not available today, this cell phone has the technology required to support such services upon their launch.
Settings The settings allow you to turn the Assisted GPS chipset in the cell phone to “Allow” or “Deny.” Setting location to On lets the network detect the cell phone’s geographic location using Assisted GPS, making some features easier to use. Setting location to Off disables Assisted GPS, but some features may still detect the cell phone’s whereabouts using cell tower...
Messaging Settings Setting Message Notification Display You can set your phone to display an icon and message notification or just display an icon notification when you receive a text message, picture message, voicemail, or Web Alert. 1. Select > Settings > Messaging > Notification. 2.
To erase a canned message: 1. Select > Settings > Messaging > Canned Msgs. 2. Select the message you want to erase and select softkey). 3. Select Erase > Yes. To change the language of the canned messages: 1. Select >...
Setting Your Signature This feature allows you to send a text message with your signature. 1. Select > Settings > Messaging > Text > Signature. 2. Press , and then select On. 3. Select Text and enter your signature. 4. Press (left softkey) >...
TTY Use A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf or hard of hearing, or who have speech or language disabilities, to communicate via a telephone. Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission.
Phone Setup Options My Favourites Your phone offers you the option of assigning a shortcut to a favourite or often-used function. Pressing the navigation key left (by default) will launch your user-defined shortcut. To assign your shortcut: 1. Press the navigation key left. 2.
Setting the Text Entry Options 1. Select > Settings > Others > Text Entry. 2. Select an option and press Auto-Capital to set the auto-capital on or off. My Words to add a word to or edit a word in the T9 database (see page 23).
Setting Abbreviated Dialing To activate Contacts Match feature: 1. Select > Settings > Others > Abbrev. Dial. 2. Select Contacts Match > Enable. To deactivate this feature, select Disable. To set your prepend number: 1. Follow step 1 above. 2. Select Prepend > Enable. To deactivate this feature, select Disable.
Headset Mode This feature allows you hands-free phone use. Check the Turbo Button (the operation button) on the headset to activate or deactivate. To connect the headset: Simply plug the headset into your phone’s headset jack. To set Turbo Button of the headset mode: 1.
Setting the Current Time 1. Select > Settings > Others > Set Time/Date. 2. Set the current time and date and press Changing the Menu Language 1. Select > Settings > Others > Language. 2. Select English or Français. Setting Key Guard This feature enables you to lock the keys in order to prevent accidental key presses.
3. Security Accessing the Security Menu You must enter your lock code to view the Security menu. 1. Select > Settings > Security. 2. Enter your lock code. Tip: If you never changed the lock code number and you can’t recall your lock code, try using the last four digits of your phone number.
Unlocking Your Phone 1. From standby mode, press Unlock 2. Enter your lock code. Changing the Lock Code 1. From the Security Menu display (See “Accessing the Security Menu” on page 46), select Others > Change Lock. 2. Enter and re-enter a new lock code. Calling in Lock Mode Even when your phone is locked, you can make calls to 911, Customer Service, and to special numbers without entering the...
Restricting Calls You can restrict phone numbers your phone dials or receives. (This setting does not apply to 911 or Customer Service.) 1. From the Security Menu display (See “Accessing the Security Menu” on page 46), select Others > Limit Use. 2.
Erasing Phone Content 1. From the Security Menu display (See “Accessing the Security Menu” on page 46), select Erase/Reset. 2. Select an option and press EraseContacts to erase all of your Contacts entries. Erase Content to erase all items you have downloaded to your phone.
Resetting Favourites 1. From the Security Menu display (See “Accessing the Security Menu” on page 46), select Erase/Reset > Reset Favourt.. 2. Press (left softkey) to continue. 3. If you are certain you would like to reset, select Yes. Restoring Default Settings Default Settings restores all the factory defaults, including the ringer types and display settings.
Using the Parental Control Feature This feature allows you to restrict outgoing and incoming calls, access to services such as Internet and 10-4, as well as use the Edit Contacts function. Most menu options for the Limit Use, Change Lock, and Lock Services menus in Parental Control are the same as the options for the Security menu.
Page 60
To add or replace a special number: 1. Select > Tools > Parental Ctrl. 2. Enter your lock code to display the Parental Control menu. 3. Select Special #s. 4. Select a field for your entry and press 5. Enter the number and press To edit Contacts: You can also edit Contacts from the Parental Control menu while any Limit Use feature (except Allow All) is enabled.
4. Roaming Understanding Roaming Recognizing Icons on the Display Screen Your phone’s display screen always lets you know when you’re off the home network. Any time you are roaming, the phone displays the roaming icon ( Roaming on Other Networks When you’re roaming, your call quality and security will be similar to the quality you receive when making calls on the home network.
5. Menu Navigation Viewing the Menus Menu Diagram Menus let you check or change your phone settings. The following outline shows your phone’s menu structure. 1. Missed Alerts 2. Call History 1. Outgoing 2. Incoming 3. Missed 4. Recent Calls 5.
Page 63
IN USE MENU Press Options (right softkey) to display the following options: 1. Flash 2. Mute/Unmute 3. Speaker On/Speaker Off 4. Three-Way Call 5. Missed Alerts 6. Call History 7. Contacts 8. Messaging 9. Tools 10. Settings...
6. Managing Call History Viewing History You’ll find the Call History feature very helpful. It is a list of the phone numbers (or Contacts entries) for calls you placed, accepted, or missed. Call History makes redialing a number fast and easy. It is continually updated as new numbers are added to the top of the list and the oldest entries are removed from the bottom of the list.
Copy to Prsnl to copy the phone number to the 10-4 Personal List (appears only when 10-4 mode is set to Enable and the number does not match any stored entry in your Personal List). Erase to erase the entry. Making a Call from Call History To place a call from Call History: 1.
Prepending a Phone Number from Call History If you need to make a call from Call History and you happen to be outside your local area code, you can add the appropriate prepending by following these steps: 1. Highlight your desired Call History entry and press (right softkey).
7. Using Contacts Displaying the Contacts List > Contacts > Find/Add Entry. Select Adding a New Contacts Entry Your phone can store up to 200 Contacts entries. Contacts can store up to a total of 500 phone numbers and each entry’s name can contain 32 characters.
To assign a Contacts entry to a group: 1. From the Contacts list display, select your desired Contacts entry and press 2. Scroll down to the box next to the 3. Select a group from the Group list and press softkey).
To find Contacts entries by voice dial tag: Note: To use this feature, you must have stored entries for voice dialing. See “Using Voice-Activated Dialing” on page 76. Finding Speed Dial Numbers > Contacts > Speed Dial #s. Select See “Using Speed Dialing” on page 20 for how to use speed dialing.
Contacts Entry Options To access a Contacts entry’s options, from the Contacts list display, select an entry and press number and press (right softkey). Options Edit to edit the selected entry. Call to dial the selected phone number. Call:Speaker On to dial the selected phone number in speakerphone mode.
Editing a Contacts Entry’s Phone Number 1. From the Contacts list display, select the Contacts entry you wish to edit the phone number to and press 2. Highlight the number you wish to edit and press (right softkey) > Edit. 3.
Assigning Speed Dial Numbers With this feature you can dial Contacts Directory entries with one key press for locations 2-9. (For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 20.) To assign a speed dial number: 1.
Assigning an Image to a Contacts Entry You can assign an image to a Contacts entry. The image is displayed when the entry calls you. To assign an image for an entry: 1. From the Contacts list display, select the entry for which you want to assign the image and press 2.
Secret Contacts Entries You can hide an entry’s phone number(s) by making them secret, which requires your lock code to edit the entry. The entry name is still displayed, but the entry’s information replaced by “<Secret>”. 1. From the Contacts list display, select the Contacts entry you want to tag as secret and press 2.
8. Personal Organizer Using Your Phone’s Calendar Use the Calendar to remind you of events or important calls you need to make. You can schedule up to 100 events, 15 Call Alarms and 20 To Do Items. Displaying Your Calendar >...
Adding an Event to the Calendar 1. From the Calendar display, highlight the day to which you want to add an event. 2. Press (right softkey) > Add Event > Schedule. Options 3. Select the following items you want to edit and press Description to enter a description for the event.
Adding a Call Alarm to the Calendar 1. From the Calendar display, highlight the day to which you want to add a call alarm and press 2. Select Add Event > Call Alarm. 3. Enter the phone number directly or press softkey) for the following options: From Contacts to select the number from your Contacts.
Adding To Do Items Your phone can store and manage 20 To Do items. 1. From the Calendar display, press 2. Select To Do List > (right softkey) > Add Item. Options 3. Enter the description and press 4. Select Priority to edit the To Do’s priority. You can select from Normal, Urgent, or Done.
Event Alerts There are several ways your phone alerts you to scheduled events. By playing the alert tone (depending on the ringer type and ringer volume setting). By blinking the LED. By lighting the LCD backlight (depending on the backlight setting).
Erasing Events To erase a day’s scheduled events: 1. From the calendar display, select the day for which you would like to erase events and press 2. Highlight one of the events and press > Erase Event > Yes. Note: You can erase registered Call Alarms if you select a Call Alarm event in step 2 above.
Using Your Phone’s Tools Using the Alarm Clock To set the alarm clock: 1. Select > Tools > Alarm Clock. Note: To set the alarm clock in a no-service area, set the actual time and date after turning off and on your phone. 2.
Using the Stopwatch To start the stopwatch: > Tools > Stopwatch. Select Press (left softkey) to start the stopwatch. Start Press (left softkey) to stop the stopwatch. Stop Press (left softkey) to start the stopwatch again. Resume To record a lap time while the stopwatch is running: Press (right softkey) to record time of the first lap.
Using the Calculator 1. Select > Tools > Calculator. 2. Enter numbers using your keypad. Press the left softkey to insert a decimal point. 3. Press the appropriate navigation key for an arithmetic option. (Up for addition, Down for subtraction, Left for multiplication, Right for division.) 4.
9. Voice Services Using Voice-Activated Dialing You can use a voice dial tag to automatically dial a phone number in your Contacts. Your phone can store up to 30 voice dial tags. Note: Please set the Voice Prompt feature (see page 28) to using the Voice-Activated Dialing so that you can hear the voice instruction from the phone.
Voice Dial Tag Options 1. Select > Tools > Voice Services > Voice Tag. 2. Select Review or Rev.:Speaker. 3. Select the desired option and press Play to play the selected voice dial tag. Speaker On / Speaker Off to play the tag in speakerphone mode.
Managing Voice/Call Memos You can use your phone’s voice services to record brief memos to remind you of important events, phone numbers, or grocery list items. Tip: If 10-4 is set to Disable and the 10-4 service is locked, you can use Memo (left softkey) as a key to access Voice/Call Memo menu in standby mode.
Reviewing Voice/Call Memos 1. Select > Tools > Voice Services> Voice Memo > Play or Play:Speaker. – or – (left softkey) > Play or Play:Speaker. Press Memo 2. Select a memo from the list and press Press (left softkey) or Slow the playing speed.
Setting Up Screen Call This feature enables you to screen incoming calls by using a recorded announcement, either one that is pre-recorded or one that you have recorded. You can also record the caller’s message into the Voice Memo list. Activating Screen Call To start Screen Call when you have incoming calls: When the phone rings or vibrates, press...
Recording a Customized Announcement 1. Select >Tools > Voice Services > Screen Call > Announcement. 2. Highlight Custom and press (right softkey) > Record. Edit If your announcement has already been recorded, select Yes or No for overwriting. 3. Press to start the 1st recording.
10. 10-4 10-4 allows you to enjoy quick, two-way, “walkie-talkie-style” communication with your friends, family, and co-workers. You can make 1-to-1 or 1-to-many calls (up to 5 others on the same call) to any other 10-4 user, anywhere on the Network. You can make and receive 10-4 calls when your phone displays or Warning! Please be sure that enabling 10-4 affects the phone’s talk and...
Making and Receiving a 10-4 Call Displaying the 10-4 List From standby mode, press 10-4 the 10-4 List. Tip: The first time you access the list, the 10-4 Help message will appear. Press (left softkey) and (left softkey) to read a brief introduction Next of 10-4.
Making a 10-4 Call (1-to-1 Call) You can place a 1-to-1 10-4 call by selecting a Contacts entry from the 10-4 List. 1. Press (left softkey) or 10-4 2. Press (left softkey), and select the list from which you Go to want to place a call (Company List, Personal List, 10-4 Outgoing, 10-4 Incoming, or 10-4 Missed) and press Tip:...
Making a 10-4 Call (Group Call) You can make a 10-4 call to all members in a Group entry, which you have in your 10-4 List. You can communicate with up to five members at a time. 1. Press (left softkey) or 10-4 2.
3. Enter the 10-4 number you want to dial. 4. Follow steps 2-4 of "Making a 10-4 Call by Entering a Number" on the previous page. Missed Call Notification for 10-4 Calls When an incoming 10-4 Call is not answered, the Missed Call Notification is displayed on your screen.
Receiving a 10-4 Call 1. Make sure your phone’s 10-4 mode is enabled (see “Setting 10-4 Mode” on page 82). 2. When you receive a 10-4 call from a Contacts entry, “10-4 Call,” the entry’s name, and the 10-4 number appear on the display.
10-4 Options When you use 10-4, several user options are available by Options pressing (right softkey). Edit to edit a 10-4 number and/or name. (See page 92.) Send Text to send a text message. (See page 98 for details.) Copy to Prsnl to copy a 10-4 last call or a 10-4 Contacts entry in the Personal Grps., Company List or Company Grps.
Adding and Editing 10-4 Contacts Entry Copying an Entry to your Personal List , Personal Group List, or Contacts List You can copy an entry to your Personal or Personal Group List, or Contacts from several different sources. 1. Press (left softkey) or 10-4 2.
3. Press (left softkey) > Save Note: If the number is already stored in the Personal or Personal Group lists, the “Save” option does not appear. Finding an Entry in the 10-4 List You can find your desired entry by entering a few letters. 1.
Adding a New Group to Your Personal Group List You can add new groups to the Personal Group List. Each group can include up to five members. You can enter a group member directly, or select the member from the Company List or Personal List.
Editing a Contacts Entry in Your Personal List 1. Press (left softkey) or 10-4 2. Press (left softkey) > Personal List. Go to 3. Highlight the entry you want to edit and press softkey) > Edit. 4. Select the field you want to edit (Name or 10-4 Number) and press 5.
Erasing 10-4 List Entries Erasing an Entry in Your Personal List or Personal Group List To erase a Contacts entry or a group entry: 1. From the 10-4 List, press (left softkey) > Personal List or Go to Personal Grps. 2.
Updating the Personal List and Personal Groups To update your Personal List and Personal Groups manually through 10-4 server: Select > Settings > 10-4 > List Update. Managing 10-4 Settings Setting Speed Dialing for 10-4 Entries 1. Select > Contacts > Speed Dial #s. 2.
Setting 10-4 Guard This feature enables you to display the warning message when you cannot receive 10-4 calls. The warning message appears when you are launching the Web or Java applications. 1. Select > Settings > 10-4 > 10-4 Guard. (A message will be displayed.) 2.
11. Messaging New Messages To view a new message: When you receive a text message or a Web Alert, it will automatically appear on your phone’s main display screen with the icon. When you receive a picture message, the information of the message appears on your phone’s main display screen with the icon.
To display a picture message from the main menu: 1. Select > Messaging > Pic. Msg. 2. Select your desired picture message and press 3. Press (left softkey) to display the picture message. To display Web Alerts: 1. Select > Messaging > Web Alerts. 2.
4. Compose a message and press To enter a message, use your keypad to type your message. Press (right softkey) to select a character Mode input mode. (See “Selecting a Character Input Mode” on page 22.) 5. Scroll down to select the message priority (Normal or Urgent). 6.
Erasing Messages 1. Select > Messaging >Text. 2. Select Inbox, Sent Mail, Pending, Drafts, or your defined folder and press 3. Highlight a message you want to erase and press softkey) > Erase. 4. Select This. Tip: This option may not be displayed if you save only one message in a folder.
12. Using Bluetooth Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number of Bluetooth devices, such as headsets, hands-free car kits, and Bluetooth enabled handhelds, PCs, and wireless phones. The Bluetooth communication range is usually up to approximately 10 meters (30 feet).
Using the Bluetooth Settings Menu The Bluetooth Settings (BT Settings) menu allows you to set up many of the characteristics of your phone’s Bluetooth service, including: Setting your phone’s visibility (or “discoverability”) for other Bluetooth devices Choosing a device for your Bluetooth calls Entering or changing the name your phone uses for Bluetooth communication Displaying your phone’s Bluetooth device information...
2. Select Phone or Hands-free. Phone to route the call through the device with which you answer the incoming call. Hands-free to route the call through the hands-free device even if you answer the incoming call with your phone. Tip: You can switch the call to your phone or to the hands-free device by pressing (right softkey) >...
Bluetooth Profiles All the Bluetooth settings you configure are stored in your phone’s Bluetooth user profile. Different profiles can be used for specific Bluetooth functions. Headset Profile – This profile functions as a wireless ear jack. When an incoming call is received, the ringer can be heard through the headset.
Pairing Bluetooth Devices Paired Devices The Bluetooth pairing process allows you to establish a trusted connection between your phone and another Bluetooth device. When devices are paired, a passcode (PIN Code) is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process.
Using the Trusted Devices Options Once you have created paired devices, several options are available from the trusted devices list. To use the trusted devices options: 1. From the trusted devices list, highlight a device. 2. Press (right softkey) to display the following options: Options Connect or Disconnect to connect to or disconnect from the Bluetooth device (if applicable).
Sending Data via Bluetooth You can send data saved on your phone to another Bluetooth device. 1. Select > Tools > Bluetooth. 2. Highlight the device from the trusted devices list and press (right softkey) > Send Item. Options 3. Select your desired item (Business Card, Contacts) and press 4.
13. Service Features Using Voicemail All unanswered calls to your phone are automatically transferred to voicemail, even if your phone is in use or turned off. Voicemail Notification There are several ways your phone alerts you to new voicemail messages: By displaying a message on the screen.
Retrieving Your Voicemail Messages Press and hold . (Your phone will dial your voicemail box.) – or – > Messaging > Voicemail > Call Voicemail. Select Note: You are charged for airtime minutes when you are accessing your voicemail from your phone. Clearing the Message Icon >...
Responding to Call Waiting When you are on a call, Call Waiting alerts you to incoming calls by sounding beeps. Your phone’s screen informs you that another call is coming in and displays the caller’s phone number (if available). To respond to an incoming call while you’re on a call: Press .
With Web access on your phone, you will be able to browse full-color graphic versions – not just text versions – of your favourite website, making it easier than ever to stay informed while on the go. Check sports scores, trade stocks, and shop all on your phone anywhere on the Home network.
Page 120
Accessing a Bookmark 1. Launch the Web and press right softkey to access the browser menu. 2. Select View Bookmarks. 3. Highlight the bookmark you wish to access and press softkey). Editing a Bookmark 1. Access View Bookmarks menu. (See “Accessing a Bookmark” above.) 2.
Page 121
Reloading a Web Page 1. Launch the Web and press right softkey to display the browser menu. 2. Select Refresh this page. Restarting the Web Browser If the Web browser seems to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser.
Downloading through the Wireless Web Your phone allows you to download images (screen savers), ringers, games, etc., from a website. 1. Select > My Content. 2. Select your desired data folder (for example, Games, Ringers, ScreenSavers, or Applications). 3. Select Get New to start up the browser. 4.
14. Safety Guidelines Maintaining Your Phone’s Peak Performance To maximize performance, do not touch the bottom portion of your phone where the internal antenna is located while using the phone. Speak directly into the mouthpiece. Avoid exposing your phone and accessories to rain or liquid spills.
Using Your Phone Near Other Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, RF signals from wireless phones may affect inadequately shielded electronic equipment. RF signals may affect improperly installed or inadequately shielded electronic operating systems and/or entertainment systems in motor vehicles.
Turning Off Your Phone in Dangerous Areas To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. Turn your phone off when you’re in any area that has a potentially explosive atmosphere.
Restricting Children’s Access to Your Phone Your phone is not a toy. Do not allow children to play with it as they could hurt themselves and others, damage the phone or make calls that increase your telephone bill. Protecting Your Battery The guidelines listed below help you get the most out of your battery’s performance.
Disposal of Lithium Ion (Li-Ion) Batteries For safe disposal options of your Li-Ion batteries, please ensure that disposal of this in accordance with law and regulation. Do not dispose of the battery in fire; the cell may explode. Do not open or puncture the battery; the released electrolyte is corrosive and may cause damage to the eyes and skin.
Page 128
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by SANYO is under license. Other trademarks and trade names are those of their respective owners. Java & all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems...