Baer EradiSpeed +1 Rear Installation Instructions

BAER
Your Complete Performance Brake Supplier!
Installation Instructions
Product: EradiSpeed +1 Rear
Vehicle
Make: GM
Model: Pickup / SUV
Year(s): 99-04 Pickup / 99+ SUV
ATTENTION:
accepted for ANY installed PART or ASSEMBLY.
prevent cosmetic damage when performing wheel fit check. In the event
that a product must be returned, please contact Baer Customer Service
for a RMA Number.
Notices – Read and Follow BEFORE ATTEMPTING INSTALLATION

All installations require proper safety procedures and protective eyewear.

All installations assume basic mechanical skill and a factory service manual for the vehicle on
which the installation is to be performed.

All references to the "left" side of the vehicle correlate to the driver's side of the vehicle.

Any installation requiring you to remove a wheel or gain access under the vehicle requires use of
jack stands appropriate to the weight of the vehicle. In all cases, jack stands rated for a minimum
of 2-tons is recommended.

A selection of hand tools sufficient to engage in the installation of these products is assumed, and
is the responsibility of the installer to have in his/her possession prior to beginning this
installation. All installations, which require removal of hydraulic hoses and/or bleeding of the
brakes, require appropriate fitting/line wrenches, safety catch can, and protective eyewear. Other
than these items, if unique or special tools are required they will be stated appropriately in the
installation step.

ALWAYS CONFIRM WHEEL FIT PRIOR TO BEGINNING INSTALLATION OF ANY BRAKE
SYSTEM OR "UPSIZED" ROTOR UPGRADE! In addition to checking wheel fitment (available
online at www.baer.com), always place the actual corner assembly or a combination of the caliper
assembly onto the rotor, and into the actual wheel. This procedure will reconfirm proper clearance
between the caliper and the wheel before proceeding with the actual installation.

Returns will not be accepted for systems that have been partially or completely installed. Use
extreme care when checking wheel fitment to prevent any cosmetic damage.
Baer Brakes, Inc.
Ph. (602) 233-1411
Read this before going any farther! Returns will not be
2222 W. Peoria Ave.
Fax. (602) 352-8445
Page 1 of 4
Instruction Part Number: 6000017
Revision Date: 23 December 2013
Use great care to
Phoenix, Arizona 85029
Email. Brakes@baer.com www.baer.com