Cleaning The Board Positioning Lifter (After Operation) - Panasonic KXF-1E4C Operating Instructions Manual

1-3-4

Cleaning the Board Positioning Lifter (After Operation)

After operation, clean the Z plate, clamp claw, load cell, and recognition hole of the board position-
ing unit.
Tools Cleaning jig for recognition hole
Load cell
Support plate
To the next page
1E4C-E-MMA01-A05-01
Clamp claw
180GC1AA
1.
2.
3.
Check Every 24 Hours (Routine)
Required time 3 to 4 minutes
Recognition hole of board positioning unit
Press at the main menu.
Machine
adjust
• "Machine Adjustment" menu appears.
UNLOCK
Press + Transport oper .
• The "PCB Transfer" screen appears.
UNLOCK
Press + Front .
• The X-Y table moves to the operator's side.
1
180RC1AA
Page 1-21