Honeywell BW-Clip4 Quick Start Manual page 7

Choose a menu item.
means that the menu item on the display includes available user ac-
tions. To choose the menu item, press and hold the button until a 3-
second countdown is displayed, and then continue to hold until the
countdown is completed.
Escape from the menu. Repeatedly press the button until
appears, and then press and hold the button. Alternatively, simply
wait for 60 seconds until the timeout is over.
NOTE
For more details on each menu option, please refer to the full operator man-
ual located on the Honeywell Analytics website.
Detectable Combustible Gases
1
Gas
Methane
Propane
Butane
Pentane
Hexane
3
Methanol/Ethanol
Hydrogen
Acetylene
1
For any gases not listed, please contact Honeywell Analytics to find the best solution
for your application.
2
The BW Clip4 LEL sensor is optimized to see methane. While the unit can detect and
respond to the other combustible gases listed in the above table, the accuracy of the readings
may be in-consistent. If the primary need is to detect a specific combustible gas other than
methane, please contact Honeywell Analytics to discuss an alternative product.
3
Please use caution when using the BW Clip4 around Methanol and/or Ethanol. The BW
Clip4 CO sensor may become inhibited by prolonged exposure to concentrations of Methanol
and/or Ethanol thus causing the unit to alarm. This condition can last up to 12 hours before
the CO sensor recovers to normal levels.
Standard Certifications
The BW Clip4 gas detector is in conformity with the following stan-
dards:
If the push symbol
Expected response at 20% LEL target gas
20% LEL
15% LEL to 45% LEL
15% LEL to 35% LEL
15% LEL to 45% LEL
8% LEL to 28% LEL
6% LEL to 26% LEL
No response
No response
2
7
appears flashing, it