Related Manuals for HIKVISION DS-1H05-T
Summary of Contents for HIKVISION DS-1H05-T
- Page 1 Ethernet-over-Coax Extender User Manual UD.6L0203D1083A01 Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
- Page 2 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to DS-1H05-T, DS-1H05-T/E, DS-1H05-R, DS-1H05-4R, DS-1H05-8R, DS-1H05-16R Ethernet-over-Coax Extender. This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice.
- Page 3 User Manual of Ethernet-over-Coax Extender Regulatory information FCC information compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 4 User Manual of Ethernet-over-Coax Extender 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
- Page 5 • Please use the power adapter, which is provided by normal company. The standard of the power adapter is 12VDC /1A for DS-1H05-T and DS-1H05-R, 12VDC/2A for DS-1H05-4R, DS-1H05-8R and DS-1H05-T/E, and 12VDC/4A for DS-1H05-16R.
- Page 6 User Manual of Ethernet-over-Coax Extender • The equipment shall be kept from rain and moisture. • Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). •...
-
Page 7: Table Of Contents
User Manual of Ethernet-over-Coax Extender Table of Contents Chapter 1 Introduction ..................6 1.1 Overview ....................6 1.2 Features....................6 1.3 Model Description ................7 1.4 System Connections................8 Chapter 2 Panels and Installation .................9 2.1 Panels of the Transmitter ..............9 2.2 Panels of the 1-channel Receiver ............11 2.3 Panels of the Multi-channel Receiver ..........12 2.4 Configuring Coax Transmission Bandwidth ........15 2.5 Installation..................16... -
Page 8: Chapter 1 Introduction
Reach the downstream speed of 36Mbps for the transmitter, the upstream speed of 11Mbps for the 1-channel receiver, and upstream speed of 3Mbps (default) for the multi-channel receiver. DS-1H05-T/E provides PoE power supply (meets IEEE802.af standard). Easy installation and maintenance. Industrial design ensures high reliability. -
Page 9: Model Description
User Manual of Ethernet-over-Coax Extender 1.3 Model Description DS-1H05-T: Ethernet-over-Coax transmitter; DS-1H05-T/E: Ethernet-over-Coax transmitter, with PoE power supply; DS-1H05-R: Ethernet-over-Coax receiver; DS-1H05-4R: 4-ch Ethernet-over-Coax receiver; DS-1H05-8R: 8-ch Ethernet-over-Coax receiver; DS-1H05-16R: 16-ch Ethernet-over-Coax receiver. Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... -
Page 10: System Connections
User Manual of Ethernet-over-Coax Extender 1.4 System Connections Refer to the following figure for the typical system connections: System Connection 1: Bus Keyboard Analog Camera Monitor Receiver Transmitter Network Camera Management Center System Connection 2: Multi-channel Receiver Transmitter Network Camera Transmitter Network Camera Management Center... -
Page 11: Chapter 2 Panels And Installation
User Manual of Ethernet-over-Coax Extender Chapter 2 Panels and Installation 2.1 Panels of the Transmitter Front Panel: Description of Front Panel: Serial No. LED Indicator Description Video In Connects to the CVBS video input signal. DIP Switch Sets the Ethernet-over-Coax bandwidth. Connects the network signal, e.g., video signal from IP camera, etc. - Page 12 Lights red when the device is powered on. Connects with the receiver for Coax Coax (BNC) transmission. Note: The DS-1H05-T/E supports PoE capability and can provide max. 12W power supply for the connected camera. Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
-
Page 13: Panels Of The 1-Channel Receiver
User Manual of Ethernet-over-Coax Extender 2.2 Panels of the 1-channel Receiver Front Panel: Description of Front Panel: Serial No. LED Indicator Description Sends the CVBS video signal to the terminal Video Out device. DIP Switch Sets the Ethernet-over-Coax bandwidth. Sends the network signal to the terminal device. -
Page 14: Panels Of The Multi-Channel Receiver
User Manual of Ethernet-over-Coax Extender Rear Panel: Description of Rear Panel: Serial No. LED Indicator Description Power Connects to 12 VDC power supply. Power LED Lights red when the device is powered on. Connects to the Transmitter and receive the Coax (BNC) modulated network video signal and CVBS analog video signal. - Page 15 User Manual of Ethernet-over-Coax Extender Front Panel: Figure 2.1 Rear Panel of DS-1H05-16R Note: The DS-1H05-4R/DS-1H05-8R provides 4/8 channel LED indicators on the panel. Description of Front Panel: Serial No. LED Indicator Description Channel LED Lights green when the corresponding Indicator channel receives the signal normally.
- Page 16 User Manual of Ethernet-over-Coax Extender Rear Panel: Figure 2.2 Rear Panel of DS-1H05-16R Note: The DS-1H05-4R/DS-1H05-8R provides 4/8 COAX BNC connectors on the panel. Description of Rear Panel: Serial No. LED Indicator Description Grounding. Power Connects to 12 VDC power supply. Sends the network signal to the (10/100/1000Mbps) terminal device.
-
Page 17: Configuring Coax Transmission Bandwidth
User Manual of Ethernet-over-Coax Extender 2.4 Configuring Coax Transmission Bandwidth You can use the DIP switch settings to configure the downstream bandwidth of the DS-1H05-T or DS-1H05-T/E module and the upstream bandwidth of the DS-1H05-R. Refer to the following table: DIP Switch... -
Page 18: Installation
User Manual of Ethernet-over-Coax Extender 2.5 Installation Prior to Installation • Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. • Verify that the package contents are correct by checking the items against the packing list. -
Page 19: Appendix: Specifications
User Manual of Ethernet-over-Coax Extender Appendix: Specifications Model DS-1H05-T DS-1H05-T/E DS-1H05-R Video Input Interface RJ-45/BNC RJ-45/BNC Coaxial BNC Video Output Interface Coaxial BNC Coaxial BNC RJ-45/BNC — Support — ≤ 20 W (when PoE power Power Consumption ≤ 5 W ≤... - Page 20 User Manual of Ethernet-over-Coax Extender Model DS-1H05-4R DS-1H05-8R DS-1H05-16R Video Input 4, Coaxial 8, Coaxial 16, Coaxial BNC Interface Video Output 2, RJ-45/BNC 2, RJ-45/BNC 4, RJ-45/BNC Interface Power Consumption ≤ 15 W ≤ 20 W ≤ 30 W Power Supply 12 V DC Working Humidity 10 % ~ 90 %...