Setup | Signal (Rgb) - Acer U5530 User Manual

Signal (RGB)
"Signal" is only
™
supported in Analog
VGA (RGB) signal.
If "Signal" is
™
automatic, the
phase, frequency
items are grayed
out, and if "Signal"
is not automatic,
the phase,
frequency items
will appear for the
user to manually
tune and are saved
in the settings after
that for the next
time projector is
turned off and on
again.
SETUP |
Automatic
Automatically selects the signal. If you use this function, the
Phase, frequency items are grayed out, and if Signal is not
automatic, the phase, frequency items will appear for user to
manually tune and saved in settings after that for next time
projector turns off and on again
Phase
Phase
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or flickers, use this function to
correct it.
Press the
`
Press the
`
User Controls
Automatic
Phase
Frequency
H. Position
V. Position
SETUP
Signal (RGB)
Automatic
to decrease the phase value.
to increase the phase value.
SETUP
Signal (RGB)
Disable
Exit
Enable
Exit
59
English