Chapter 3: Operation; Memorizing Channels - Samsung DTB-H260F Owner's Instructions Manual

3
CHAPTER THREE
Operation

Memorizing Channels

Before you can use any of the special channel buttons (CH
use must be scanned for available channels.
1
Press the MENU ( ) button on your remote control.
2
Use the / buttons to select the
Channel menu and press the ENTER
( ) button.
Use the / buttons to select Auto
Program and press the ENTER (
button.
3
Use the / buttons to select an
antenna and press the ENTER (
button.
"Auto Channel in Progress."will
be displayed while your available
channels are scanned. Upon
completion, your Set-Top Box will
store all the available scanned
channels.
NOTES
• Your Set-Top Box MUST be connected to an antenna in order to receive
digital TV signals.
• Even if a specific channel is removed from the memory, you can always tune
to that channel directly by using the NUMERIC buttons on your remote
control.
• If you wish to stop scanning in the middle of the scanning process, press
the ENTER ( ) button to select the stop command, and then press the
ENTER ( ) button to select OK.
• If you have changed the connected antenna, use the ANTENNA button
on your remote control to change the selected antenna after scanning
completes.
/ , FAV.CH, PRE.CH), the antenna you wish to
)
)
23