CONNECTING TO VIDEO EQUIPMENT
Connecting to the Digital TV Receiver
Digital TV Receiver
Connect antenna cable to antenna
1
signal input terminal of the receiver.
Connect the COMPONENT 1
(Y/Pb/Pr) or COMPONENT 2
(Y/Pb/Pr) input port at the back of the
projector to the Component port at
the back of the digital broadcast
2
receiver with the component cable.
If the digital broadcast receiver provides a
DVI or PC output port, you can connect a
digital broadcast receiver using the [DVI] or
[PC] input port of the projector.
Viewing the picture
COMP.1
1
COMP.2
2
PC
DVI
Rear side of Projector
DVI Cable
or
(Set-Top Box)
Turn on the projector and press the COMP.1
1
button to select Component1.
Press the COMP.2 button to select
2
Component2 if COMPONENT2 is connected.
If the receiver is connected to DVI or PC port,
press the DVI or PC button to select DVI or PC
respectively.
■
When Component Mode is not available, check that
the component cables are in place.
PC Video Cable
Component Cable
Rear Connection
When finish connecting the devices,
3
connect the power of the projector
and the DTV receiver.
Antenna Input
Component1
DVI
25