Table of Contents
Advertisement
Connecting to DVI (Digital Visual Interface)
Connect a set of audio
1
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
Connect an HDMI/DVI cable
2
between the HDMI/DVI IN
jack on the TV and the DVI
OUT jack on the Set-Top Box.
NOTES
• Make sure the DVI source's
power is on, or you will be
unable to select it in the
TV menu's source list.
• The HDMI/DVI IN jack is not
compatible with PC.
• Please be sure to match the
color coded input terminals
and cable jacks.
Connecting to an Analog Amplifier
The AV OUT (AUDIO L/R)
1
jacks cannot be used for
external speakers.
You must hook them up to an
amplifier.
NOTE
• When an audio amplifier is
connected to the AV OUT
(AUDIO L/R) jacks:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the volume
control audio amplifier.
• If using the HDMI/DVI, PC, or
Component input on the TV, the
audio output signal is available
only when the TV's Internal Mute
is set to on.
(Refer to page 76)
TV Rear Panel
Incoming
Cable or
Antenna
TV Rear Panel
1
2
DTV Set-Top Box
1
Amplifier
English - 23
Advertisement
Table of Contents
