Summary of Contents for Samsung HL-S6167W, HL-S6767W
Page 1
Owner’s Instructions HL-S6167W HL-S6767W This device is a Class B digital apparatus. Register your product at www.samsung.com/global/register...
Page 3
Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels.
Table of Contents Your New Wide TV...8 Viewing Position ...8 List of Features...9 Accessories ...9 Front Panel LED Indicators...10 Right side buttons...11 Side Panel Jacks ...11 Rear Panel Jacks ...12 Remote Control...13 Connections ...16 Connecting VHF and UHF Antennas ...16 Antennas with 75-ohm Round Leads ...16 Connecting Cable TV ...17 Cable without a Cable Box...17...
Page 5
Picture Control ...56 Picture Control...56 Changing the Picture Size...59 Digital Noise Reduction ...60 DNIe (Digital Natural Image engine)...61 Setting the My Color Control Mode ...62 Using the Color Weakness Enhancement Feature...64 Setting the Film Mode ...65 Freezing the Picture...66 Setting the Blue Screen Mode...67 Sound Control ...70 Sound Control ...70 Setting up DNSe (Digital Natural Sound engine) ...72...
Your New Wide TV Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. When installing the product, make sure to keep it away from the wall (more than 10cm/4 inches) for ventilation purposes.
List of Features Your TV is designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features: • Easy-to-operate remote control • Dynamic menus and Navigating menus by using the menu map •...
Your New Wide TV Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. The product color and shape may vary depending on the model. Indicator Light Key : Light is On : Light is Blinking : Light is Off TIMER LAMP STAND BY/TEMP...
Right Side Buttons The buttons on the right side panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model. Press to switch between viewing TV programs and signals from connected components.
Your New Wide TV Rear Panel Jacks Œ VIDEO/AUDIO INPUT jacks Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to pages 19, 22, and 24) ´ S-VIDEO INPUT jacks Connects an S-Video signal from an S-VHS VCR or DVD player. (Refer to pages 19, and 24) ˇ...
(Secondary Audio Program). 16. Mode (TV/DVD/STB/CABLE/VCR) Selects a target device to be controlled by the Samsung remote control (i.e., TV, DVD, STB, CABLE, or VCR). 17. SOURCE Press to display all of the available video sources (TV, AV1, AV2, AV3, S-Video1, S-Video2, S-Video3, Component1, Component2, PC, HDMI1, and HDMI2).
Page 14
Your New Wide TV Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control.
Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 75-ohm Round Leads If your antenna looks like this: Plug the antenna lead into the ANT 2 IN (AIR) on the rear panel of your TV.
Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box Plug the incoming cable into the ANT 1 IN (CABLE) on the rear panel of your TV.
Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). Find and disconnect the...
Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect a video cable between the VIDEO IN (1 or 2) (or S-VIDEO IN 1 or 2) jack on the TV and the VIDEO (or S-VIDEO) output jack on the VCR. Connect a set of audio cables between the AUDIO IN (1 or 2) jacks on the TV...
Connections Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV. You can use your camcorder to view tapes without using a VCR. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.
Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to HDMI (High Definition Multimedia Interface) Connect an HDMI cable between the HDMI IN 2 (or HDMI IN 1/DVI IN) jack on the TV and the HDMI OUT jack on the DVD player.
Connections Connecting to Audio and Video Jacks Connect a video cable between the VIDEO IN (1 or 2) jack on the TV and the VIDEO OUT jack on the DVD player. Connect a set of audio cables between the AUDIO IN (1 or 2) jacks on the TV and the AUDIO OUT jacks on the DVD player.
Connecting a DTV Set-Top Box Connecting to Y, P Connect a set of Component cables between the COMPONENT (1 or 2) VIDEO (Y, P ) IN jacks on the TV and VIDEO (Y/P ) OUT jacks on the Set-Top Box. Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on...
Connections Connecting a VCR and DTV Set-Top Box Connect the Video or S-Video/ Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output...
Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. If your audio system has an optical digital audio input, connect to the “DIGITAL AUDIO OUT(OPTICAL)”...
Connections Connecting to an Analog Amplifier The “AV OUT (AUDIO L/R)” jacks cannot be used for external speakers. You must hook them up to an amplifier. When an audio amplifier is connected to the “AV OUT (AUDIO L/R)” jacks: Decrease the gain (volume) of the TV, and adjust the volume level with the volume control on your audio...
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the (power) button on the front panel. Dynamic Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control.
Navigating Menus by Using the Menu Map Using the Menu Map of the main menu enables you to view all menus and select a function quickly. You can select any menu by using the menu map. Press the MENU button. The main menu will appear at the bottom of the screen.
Operation Selecting a Menu Language When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. English - 30 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
Memorizing Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic).
Page 32
Operation Press the œ or √ button to select the Antenna connection, then press the ENTER button. • Air : “Air” antenna signal Cable : “Cable” antenna signal Air+Cable : “Air” and “Cable” antenna signals When selecting Cable TV system: Press the ENTER button to start the auto program.
Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.
Operation Customizing Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. NOTE •...
Page 35
Setting Up the Remote to Operate Your Cable Box Turn off your cable box. Press the CABLE button on your TV’s remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the cable box code listed on page 39 of this manual for your brand of cable box.
Page 36
Operation Setting Up the Remote to Operate Your DVD Note on Using Remote Control Modes: DVD When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume. English - 36 Turn off your DVD. Press the DVD button on your TV’s remote control. Press the SET button on your TV's remote control.
Page 37
Setting Up the Remote to Operate Your Set Top Box Turn off your STB. Press the STB button on your TV’s remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the STB code listed on page 39 of this manual for your brand of STB.
Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually NOTE •...
Page 42
Operation Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. Press the … or † button to select “Clock”, then press the ENTER button.
Setting the On/Off Timer NOTE • Auto Power Off When you set the timer “On”, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer “On”...
Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from “30 min”...
Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source Alternate method Press the SOURCE button on the remote control repeatedly to select an external signal source.
Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. English - 46 Press the MENU button. Press the ENTER button to select “Input”. Press the … or † button to select “Edit Name”, then press the ENTER button.
Channel Control Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control. Preset : To use the Channel Manager function, first run Auto Program (see pages 31~32).
Viewing the Channel Lists You can display a list of all channels, added channels, or your favorite channels. Preset : To use the Channel Manager function, first run Auto Program (see pages 31~32). Alternate method Press the CH MGR button on the remote control to display a list of channels.
Channel Control Adding and Erasing Channels Preset : To use the Channel Manager function, first run Auto Program (See pages 31~32). English - 50 Press the MENU button. Press the œ or √ button to select “Channel”, then press the ENTER button.
Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear. NOTE •...
Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. NOTES • Only analog TV channels can be fine tuned. • “ * ” will appear next to the name of fine-tuned channels. English - 52 Analog Press the MENU button.
Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
Channel Control LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). NOTES • LNA functions only when antenna is set to Air. •...
Picture Control Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard Alternate method Press the P.MODE button on the remote control repeatedly to select the desired picture mode. • Choose “Dynamic” for viewing the TV during the day or when •...
Page 57
Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. NOTE • In PC mode, the Contrast and Brightness can be selected. Press the MENU button. Press the œ...
Page 58
Picture Control Press the ENTER button to return to “Mode”. Press the … or † button to select “Color Tone”, then press the ENTER button. Press the … or † button to select a particular item (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. Select “Return”...
Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. Alternate method Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. • “16:9”: Sets the picture to •...
Picture Control Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. English - 60 Press the MENU button. Press the œ...
DNIe (Digital Natural Image engine) This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to Demo, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes.
Picture Control Setting the My Color Control Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky, and grass tones using the predefined settings (Red, Green, Blue, Yellow, Pink, Standard, and Custom) without affecting other colors on the screen. Using the My Color Control Function in the Easy Control Menu Skin, sky and grass tones are easily adjustable to suit your preferences.
Page 63
My Color Control Custom Settings Users can adjust the 5 My Color Control colors (Red, Green, Blue, Yellow, and Pink). Resetting the My Color Control Colors to the Factory Defaults You can return to the factory default settings for My Color Control colors. Press the MENU button.
Picture Control Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to compensate for the user’s particular color weakness. English - 64 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
Setting the Film Mode You can automatically sense and process film signals and adjust the picture for optimum quality. NOTE • The Film Mode can only be set in AV modes (AV, S-Video, Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button.
Picture Control Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound will still be heard.) To cancel this function, press the STILL button again or press any button on the remote control. English - 66...
Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”. Press the MENU button.
Sound Control Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– button to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound.
Page 71
Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the automatic settings. See previous page.) Press the MENU button. Press the œ or √ button to select “Sound”, then press the ENTER button.
Sound Control Setting up DNSe (Digital Natural Sound engine) DNSe enhances the sound quality, automatically controls output, and prevents sound distortion. Alternate method Press the DNSe button on the remote control repeatedly to select “Off” or “On”. English - 72 Press the MENU button.
Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the volume is high or by raising the sound output when the volume is low.
Sound Control Choosing a Multi-Channel Sound (MTS) track The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program. Alternate method Press the MTS button on the remote control.
Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Alternate method Press the MTS button on the remote control repeatedly to select a Multi-Channel Sound track. NOTES • Choose “Mono” for channels that are broadcasting in mono, or •...
Sound Control Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut off sound from the TV's internal speakers. NOTES • The VOL +, VOL - and MUTE buttons do not operate when the •...
Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. Press the MENU button. Press the œ or √ button to select “Sound”, then press the ENTER button. Press the … or † button to select “Melody”, then press the ENTER button.
Special Features Setting the Function Help Displays Help on the menu functions. The Help appears at the top of the screen. NOTE • The Function Help default setting is On. English - 80 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
Menu Transparency Level Adjusts the transparency of the menu screen. Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. Press the … or † button to select “Menu Transparency”, then press the ENTER button.
Special Features Using Game Mode When connecting to a game console such as PlayStation realistic gaming experience by setting the game mode to on. Restrictions on Game Mode (Caution) NOTES • To disconnect the game console and connect another external •...
Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later, if necessary). How to Change Your Password NOTES •...
Page 84
Special Features How to Enable/Disable the Rating Controls English - 84 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button.
Page 85
How to Set up Restrictions Using “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or “MPAA Rating”. Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
Page 86
Special Features You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol “ ”. Press the …/†/œ/√ buttons and the ENTER button to activate the appropriate restrictions for TV (FCC) rating system. To unlock items that are locked, press the ENTER button again. TV-Y : Young children.
Page 87
How to Set up Restrictions Using “MPAA Rating” The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating”...
Page 88
Special Features Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-Y All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two to six.
Page 89
How to Set up Restrictions Using Canadian English Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the †...
Page 90
Special Features Press the … or † button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. The “ ” symbol is indicated. To unlock items that are locked, press the ENTER button again. Select “Return” by pressing the … or † button, then press the ENTER button to return to the previous menu.
Page 91
How to Set up Restrictions Using Canadian French Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the †...
Page 92
Special Features Press the … or † button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. The “ ” symbol is indicated. To unlock items that are locked, press the ENTER button again. Select “Return” by pressing the … or † button, then press the ENTER button to return to the previous menu.
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. NOTES • If information is not downloaded from the broadcasting station, • Parental restriction information is automatically downloaded while • The Downloadable U.S. Rating menu is available for use after Press the MENU button.
Page 94
Special Features You can independently lock the TV ratings. The locked TV ratings are indicated by the symbol “ ”. To unlock a locked channel, press the ENTER button again. Press the …/†/œ/√ buttons and the ENTER button to activate the appropriate restrictions for TV rating system.
Viewing Closed Captions (On-Screen Text Messages) The Analog Caption function operates in either analog TV channel mode or external source mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Analog Press the MENU button. Press the œ...
Page 96
Special Features Press the … or † button to select “Mode”, then press the ENTER button. Press the … or † button to select submenu (CC1~CC4 or Text1~Text4) you want, then press the ENTER button. Select “Return” by pressing the … or † button, then press the ENTER button to return to the previous menu.
Viewing Closed Captions (On-Screen Text Messages) The Digital Captions function operates on digital channels. NOTE • “Caption Options” are available only when “Service1~Service6” can be selected in “Mode”. Digital Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
Page 98
Special Features Press the … or † button to select “Size”, then press the ENTER button. Press the … or † button to select the desired item in the Size menu, then press the ENTER button. Set other listed options below using the same method as above. Select “Return”...
PC Display Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. Connecting a PC (15p D-SUB) to the TV Connect a PC cable between the PC Output jack on the PC and the RGB input jack...
Page 101
PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Right click the mouse on the Windows Desktop, then click on Properties.
Page 102
PC Display Checklist Before Connecting to a PC • Adjust the PC Display Setup to the resolution and frequency values that are supported by the TV. • Please read the user’s manual provided with the PC (Graphic Card & Sound Card). •...
Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen. NOTE •...
PC Display Changing the Picture Position After connecting the TV to your PC, adjust the position of the picture if it is not well-aligned. English - 104 Press the SOURCE button to select “PC”. Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
Adjusting the Picture Quality and Position Automatically This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. Press the SOURCE button to select “PC”. Press the MENU button. Press the œ...
PC Display Changing the Picture Size (PC Mode) You can select the picture size which best corresponds to your viewing requirements. Alternate method Press the P.SIZE button on the remote control repeatedly to change the picture Size. • “Wide”: The picture position English - 106 Press the SOURCE button to select “PC”.
Viewing the Current Resolution You can get the resolution information of your PC. NOTE • To change the resolution, see pages 101~102. Press the SOURCE button to select “PC”. Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
PC Display Initializing the Picture Settings You can replace all picture settings with the factory default values. English - 108 Press the SOURCE button to select “PC”. Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button.
2. The lamp type is indicated on the side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center. • Caution 1.
Page 111
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves. Unplug TV, then use a screwdriver to remove the screws. Remove the Lamp cover. Remove the Lamp cover duct holding the tab and pulling it out. Remove the screw securing the Lamp by using a screwdriver.
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Problem Poor picture quality. Poor sound quality.
Page 113
Problem I want to view the clearest picture on in 1080p resolution. The visual qualities of digital channels vary. Although the TV caption shows HD, the visual quality is not satisfactory. • The display panel used for the DLP TV is composed of many tiny pixels. These pixels may occasionally appear on the screen.
Appendix Cleaning and Maintaining Your TV Please follow these guidelines to get the maximum performance from your TV. Placement • Do not put the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners.
Specifications Model HL-S6167W 56.93 x 18.37 x 41.59 inches Dimensions 1446 x 466.5 x 1056.5 mm (W x D x H) 45 Kg / 99.21 lbs Weight NTSC TV System 8VSB (terrestrial) QAM (cable) Channel Terrestrial (analog) Cable TV (analog) Terrestrial (digital) Cable TV (digital) Component Video IN...
Page 116
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center CANADA 1-800-SAMSUNG (7267864) U.S.A 1-800-SAMSUNG (7267864) Web Site Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada www.samsung.com/ca...