Sending A Fax Automatically; Sending A Fax Manually - Samsung CLX-3160 User Manual

Recommended resolution settings for different original document types
are described in the table below:
Mode
Standard Originals with normal sized characters.
Originals containing small characters or thin lines or
Fine
originals printed using a dot-matrix printer.
Originals containing extremely fine detail. Super
Fine mode is enabled only if the machine with
which you are communicating also supports the
Super Fine resolution.
Notes
• For memory transmission, Super Fine
mode is not available. The resolution
Super Fine
setting is automatically changed to Fine.
• When your machine is set to Super Fine
resolution and the fax machine with which
you are communicating does not support
Super Fine resolution, the machine
transmits using the highest resolution
mode supported by the other fax machine.
Photo Fax Originals containing shades of gray or photographs.
Note
• The resolution setting is applied to the current fax job. To
change the default setting, see page 10.2.
Darkness
You can select the default contrast mode to fax your originals lighter or
darker.
1 Press Fax.
2 Press Menu, and then OK when Fax Feature appears on the
bottom line of the display.
3 Press OK when Darkness appears.
4 Press the Scroll buttons until the option you want appears and
press OK.
5 Press Stop/Clear to return to Standby mode.
Note
• The darkness setting is applied to the current fax job. To
change the default setting, see page 10.2.
Recommended for:

Sending a fax automatically

1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
Ready to Fax appears on the top line of the display.
3 Adjust the resolution and the darkness to suit your fax needs.
4 Enter the receiving fax machine's number.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.3.
5 Press Color Start or Black Start.
6 If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK.
7 When you have finished, select No at the Another Page? prompt.
After the number is dialed, the machine begins sending the fax
when the receiving fax machine answers.
Note
• When you want to cancel a fax job, press Stop/Clear at any
time while sending.

Sending a fax manually

1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the resolution and the darkness to suit your fax needs. See
page 9.1.
4 Press On Hook Dial. You hear a dial tone.
5 Enter the receiving fax machine's number.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.3.
6 Press Color Start or Black Start when you hear a high-pitched fax
signal from the remote fax machine.
Note
• When you want to cancel a fax job, press Stop/Clear at any
time while sending.
9.2
<Faxing (CLX-3160FN only)>