Sony SU-RS52U Instructions Manual page 4

Check the part
Name
TV Stand
4
(US)
Install a TV
Quantity
WARNING
When installing the TV on the stand, make sure that the
power cord is encased in the terminal cover. If you install
the TV with the power cord trailing, you may pinch the
cord between the TV and the top plate, or may trip,
1
resulting in fire or injury.
1
Remove the Table-Top Stand
from the TV.
1 Using a screwdriver, remove the two screws and
Notes
• Remove the two screws first, and then remove the two
shafts.
• The screws and shafts are used to install the TV on the TV
stand.
zTip
The shafts can also be removed by using a coin.
two shafts from the rear of the TV.
Screw
Shaft
Terminal cover