Advertisement
CARTRIDGE TROUBLESHOOTING
On this type of cartridge, there is really nothing that can go wrong - print wise, but there is one plastic failure point that you
need to be aware of. After a few cycles, the plastic clip indicated here can wear down, and not allow the handle to lock in
place properly. If this happens, you will get a "Cartridge not installed" message. This can sometimes be fixed by reforming the clip
with a plastic welding iron or a low wattage soldering iron, but at best this is a temporary fix. The cartridge should really be
replaced when this happens.
Again, there is really not much that can go wrong with these cartridges. From our experience, it is a safe bet that most of the
problems will come from the drum unit.
IMAGE DEFECT CHART
Developer roller:
PCR:
Transfer roller:
OPC drum:
Upper fuser roller:
Lower pressure roller:
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
SAMSUNG SCX-6555 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
39.25 mm
43.96 mm
57.14 mm
94.3 mm
125.6 mm
157 mm
www.uninetimaging.com
Advertisement
