Vivitar IPC 117 User Manual page 11

INSTALLING THE WALL MOUNT
1. Find the location (wall surface) where you would like to mount the camera.
2. Using a pencil, place the wall mount against the surface (wall) and mark on the surface
where the two screw holes on the wall mount are. These will mark the location where you will
drill to place the plastic anchors.
3. Drill two holes at the spots you marked and push the plastic anchors into the holes in the
surface/wall.
4. Place the wall mount and align the holes with the anchors and drive or drill the mount screws
in.
10