Honeywell T7300E Series Installation Instructions Manual page 4

T7300E SERIES 2000 COMMERCIAL MICROELECTRONIC HEAT PUMP THERMOSTAT
Installer
Setup Number
(Press
Unoccupied
Temp key
to change)
Select
Clock format 16
Intelligent Fan™ 17
operation
Auxiliary Contact 18
Operation
Fan key 21
adjustment
(models with
Fan key only)
Remote sensing 22
Keypad lockout 25
level (keypad
lockout is
enabled and
disabled by DIP
switch 1 on back
of thermostat)
Duration of 26
temporary
override
Minimum off 33
time for the
compressor
Temperature 37
display
adjustment
62-0124—3
Table 2. Thermostat Installer Setup Options (Continued).
Factory-Setting
Display Description
0 12-hour clock format
2 Fan operates
continuously in
Occupied and
Recovery mode. Fan
operates with call for
heating or cooling in
Unoccupied mode.
0 0—Time of day
contacts
0 Fan setting key is
operational
0 Remote sensing not
activated
0 No lockout
3 3—Three hour
override
4 4 minute minimum off
time for the
compressor
0 No difference in
displayed temperature
and actual room
temperature
Other Choices
(Press
Display
1 24-hour clock format
0 or 1 0—Fan only operates with
calls for heating or cooling
in Occupied and
Unoccupied modes
1—Fan operates
continuously in Occupied
mode. Fan operates with
calls for heating or cooling
in Unoccupied mode.
1 1—Economizer contacts
1 Fan setting key is Auto only
1 Remote sensing activated
1, 2, 3 1—Lockout all keys on
thermostat except system
and fan settings, temporary
setpoint, clock and day
adjustments
2—Lockout all keys except
set current Day/Time,
increase
3—Lockout all keys except
temporary occupied, set
day and clock keys.
1, 8 or 12 1—One hour override
8—Eight hour override
12—Twelve hour override
0, 1, 2, 3 Minimum number of minutes
or 5 (0 thru 5) the compressor will
be off between calls for the
compressor
1—Display adjusts to 1°F
1 thru 6
higher than actual room
temperature
2—Display adjusts to 2°F
higher than actual room
temperature
3—Display adjusts to 3°F
higher than actual room
temperature
4—Display adjusts to 1°F
lower than actual room
temperature
5—Display adjusts to 2°F
lower than actual room
temperature
6—Display adjusts to 3°F
lower than actual room
temperature
4
or key to change)
Description
and decrease
keys.
Actual
Setting
—
(continued)