Lcd Error Messages - Samsung SF-340 Series User Manual

LCD error messages

Display
Adjust scanner first in Maintenance
menu
Check white paper document and try
again
Clean white roller, glass and try again
Duplicated with [Speed No.xx]
The 'xx' indicates the location
number.
Exceeded Job Memory
Exceeded Job Memory
Cancel scheduled job and try again
Exceeded Total
Message Memory
ICM Memory Full
Ink Low. Install new ink cartridge
Install ink cartridge
Invalid Time
Job Not Assigned
Junk Fax Empty
Junk Fax Full
Load Document
Load paper and press Enter
Memory Full
Memory Full
Press Enter to continue
Status/Solution
The shading waveform to be used as a reference is corrupted due
to unknown reason. Adjust the scanner to fix this problem as
described in "Shading adjustment" on page 8.4.
The scanning level is too low to compare with reference level.
To adjust shading, you should use the plain and white paper.
The scanning level is slightly low, which can affect the image
quality. To clean concerned parts, see "Cleaning the document
scanner" on page 8.2.
The same number has already been registered into another speed
dial location.
The machine can hold 3
My Favorites
The broadcasting and delayed fax can hold 5 jobs in total.
Cancel scheduled job and try again.
The machine can hold up to 100 messages (OGM + ICM +
recorded conversations).
Erase old messages to make a room in the memory.
The voice memory is full. No more caller's messages can be
recorded (Total recording time is about 15 minutes).
The print cartridge has run out of ink. To install a new Print Car-
tridge, see "Replacing the print cartridge" on page 8.3. Although
this message is displayed, you can make a copy or print a report.
But, stored data in memory can be printed by changing the car-
tridge.
Print cartridge is not installed or improperly installed.
The time you set for fax forwarding is wrong.
You attempted to cancel the scheduled job but there is no jobs
scheduled. You attempted to delete or print send the My Favor-
ites document when there is no document stored.
You attempted to delete the junk fax number when there is no
junk fax number.
The machine can hold 20 junk fax numbers but you tried to add
more.
You have tried to send a fax and there is no document loaded
into the machine.
You have tried to do any job and there is no paper loaded into the
machine.
Memory has become full while receiving a fax or short message. Fax/Telephone
Memory has become full while scanning a document. Press
to send or copy the scanned pages only. To cancel the job
Enter
press and try again when memory becomes avail-
Stop/Clear
able, or split the new document into smaller parts.
Scanner
Scanner
Scanner
Telephone
but you tried to add more. Fax
Fax
TAM (SF-345TP
only)
TAM (SF-345TP
only)
Cartridge
Cartridge
Fax
Fax
Fax
Fax
Document
Paper
Fax/Copy
Related to:
8.7