Internal Care; Filtering System - Kenwood KDW60X18 Installation Instructions Manual

internal care

filtering system

The filtering system in the base of the wash cabinet retains coarse debris from the washing cycle.
The collected coarse debris may cause the filters to clog. Check the condition of the filters regularly
and clean them if necessary under running water.
Follow the steps below to clean the filters in the wash cabinet.
1. Ensure the dishwasher is
switched off.
2. Turn the coarse filter anti-
clockwise and gently lift it
out.
3. Gently lift the metal filter
and pull out.
4. The centre of the filter can be removed by gently
pulling it apart. Rinse all the filters under running water,
including the filter
cylinder, and then refit all filters in the reverse order.
5. Carefully refit the main filter.
6. Gently turn the coarse filter in clockwise direction until
the arrows align and it clicks into place.
• Do not over tighten the filters.
• Put the filters back in sequence securely, otherwise coarse debris could get into the
system and cause a blockage.
• NEVER use the dishwasher without the filters in place. Improper replacement of the filters
may reduce the performance level of the appliance and damage dishes and utensils.
* All images are for reference only; please refer to your individual unit for actual item.
30
Kenwood Freestanding Dishwasher KDW60T18/X18 Manual.indd 30 07/06/2018 15:59