Start Job - RIDGID SeeSnake CS1000 Quick Start Manual

2. Choose your power source:
• Battery - With dry hands, insert 1 or 2 approved 18-volt Li-Ion batteries
into the battery docks in the back of the unit.
• External AC - Unhook the velcro strap on the back of the unit to free the
power cord and remove the plug from its holder. With dry hands, plug
the power cord into an approved outlet.
power supply is intended for indoor use only.
WARNING
3. Place the camera head at the job entry point before powering the CS1000 ON
to properly zero the counter. This is typically the pipe opening.
Power On
Power the CS1000 and camera on by pressing one of the following keys:
• Power Key
• Power Key
• Autolog Key
camera, starts a new Job File, and starts recording an Autolog video. Use this
method to quick start an inspection.

Start Job

To create and open a new job press one of the following keys on the keypad:
• Autolog Key
• Video Key
• Photo Key
• Photo Tag Key
and Note screen.
• Job Manager Key
where you can use the Select Key
New Job" from the list of available actions.
Settings
You can change your settings by pressing the
Settings from the Main Menu. In the Settings Menu you can customize distance
units, overlay, time and date, video settings, and saving preferences.
Never power with AC power cord in a wet environment!
on the CS1000 keypad.
below the screen.
on the CS1000 keypad. This powers on the CS1000 and
Opens a new Job and starts recording an Autolog video.
Opens a new Job and starts a video recording.
Opens a new Job and takes a photo.
Opens a new Job, takes a photo and opens the Issue Tag
Opens the Job Manager screen
Ridge Tool Company
The provided insulated external
to choose "Start
Menu Key , and then selecting
3