Installing Your Cable Modem; Connect The Cable Modem To Your Computer; Figure 3 - Sb6183 Connection Diagram - Motorola SURFboard SB6183 User Manual

Installing Your Cable Modem

3

Connect the Cable Modem to Your Computer

Before installing the cable modem:
•
Check with your service provider to ensure broadband cable service is available in your area.
•
Choose a location in your home where your computer and cable modem are preferably near existing
cable and electrical wall outlets.
1. Check that a coaxial cable is connected to a cable wall outlet or RF splitter (optional).
2. Connect the other end of the coaxial cable to the Cable connector on the cable modem.
Use your hand to tighten the connectors to avoid damaging them.
3. Connect the Ethernet cable to the Ethernet port on the cable modem.
4. Connect the other end of the Ethernet cable to the Ethernet port on your computer.
5. Connect the power cord to the Power port on the cable modem.
6. Plug the other end of the power cord into an electrical wall outlet.
This automatically powers ON the cable modem.
SURFboard® SB6183 DOCSIS 3.0® Cable Modem • User Guide
365-095-24153 x.1
Installing Your Cable Modem
This product is for indoor use only. Do not route the Ethernet
cable(s) outside of the building. Exposure of the cables to
lightning could create a safety hazard and damage the product.
Figure 3 – SB6183 Connection Diagram
5