Samsung EI-GP20 Manual

This manual's images and content may differ from the
product.
Overview
Gamepad
Indicator light
Power switch
Charging jack
Charging the device
Use a charger to charge the battery before using the
device for the first time. Connect the device and the
charger, and then plug the charger into an electric
socket.
The charger and the charging cable are sold
Type E. AXXXXX
separately.
www.samsung.com 09/2013. Rev. 1.0
EI-GP20_UM_E_Eng.indd 1
Turning the device on or off
Slide the power switch to turn the device on or off, or
enter Pairing mode.
Holder
Off
Pairing mode
On
Checking the indicator light
Monitor the device's condition by checking the indicator
Select button
light.
Device status
Status Indicator light
Turned off Turns off.
Turned on Flashes blue four times.
In Pairing mode Turns blue for 3 minutes.
Bluetooth
Flashes blue three times.
Connected
Bluetooth
Flashes blue times.
Disconnected
Battery power
Flashes red continuously.
is low
While charging Turns red.
Battery status Option 2: Pairing via NFC
1
Press and hold the select button when the device is
Activate the NFC and Bluetooth feature on the
turned on.
smartphone. Make sure to unlock the smartphone
before using the NFC feature.
Status Indicator light
2
Turn the device on, and then the device's back, the
Above 80% Flashes blue five times.
NFC logo, to the smartphone's NFC antenna until
NFC pairing completes.
20%-80% Flashes yellow five times.
•
Some of NFC-enabled devices may not support
Below 20% Flashes red five times.
this feature.
•
To locate the mobile device's NFC antenna and
Pairing and connecting the device activate NFC, refer to the mobile device's user
manual.
When using a new smartphone, you need to pair it
with the device. Once pairing is complete, the device
Reconnecting and disconnecting
attempts to reconnect each time you turn it on.
Option 1: Manual Pairing
Reconnecting
1
If the connection is lost while in use, press any button or
Slide the power switch all the way to the right for 3
use the Bluetooth menu on the smartphone.
seconds to enter Pairing mode.
•
The indicator light turns blue for 3 minutes.
Make sure the device is turned on, and the
smartphone's Bluetooth feature is activated.
2
Activate the Bluetooth feature on the smartphone,
scan for the device, and then select the device
Disconnecting
name "Samsung Game Pad EI-GP20" from the list
of available devices. For more details, refer to the
Turn off the device or use the Bluetooth menu on the
mobile device's user manual.
smartphone.
Attaching a smartphone to the device
1
Pull out the holder from the device.
Do not pull out the holder excessively. Doing so may
damage the device.
2
Slide the smartphone into the holder until it is fixed
firmly as shown in the image below.
The device is suitable for 4"-6.3" Samsung
smartphones.
2013-09-03 오후 5:12:28