Advertisement
Rear Panel Inputs/Output
1.
SuB ouT:
Connect your subwoofer to this variable output.
Adjust the subwoofer output using the remote control.
2.
inputs:
• l1: Connect your TV or other accessory
device to the line 1 input.
• l2: Connect the headphone output of your TV or
mobile device to the 1/8" (3.5mm) input.
Front Panel Indicators
1
6
1.
The HITACHI logo will illuminate for about 15 seconds
when power is turned to "On".
2.
AUTO-BASS enhances the low frequency tones.
The "NITE" Mode button can disable "AUTO-BASS".
3.
AUTO-VOLUME will control the volume to keep the
commercials and special effects from being too loud
and will raise whispers so they can be heard.
4.
(4A/4B)
3D/SURR: Press the 3D/SURR button on the remote to
switch from 3D Sound to Surround Sound effects and "Off".
5.
IR Receiver: The Remote Control Sensor is located here.
Blocking this sensor will prevent the remote control
operation of the Sound Bar.
HSB40B16_QSG.indd 2
• D1: opTiCal: Connect your TV Optical Output to this digital input.
• D2: COAXIAL: Connect your TV Coaxial Output to this digital input.
note: HSB40B16 Inputs/Output panel is shown.
HSB32B26 Inputs/Output order is different.
2
4A 4B
3
7, 8, 9
10
11
6.
The Bluetooth
®
light will illuminate when
the Bluetooth Mode is selected.
7.
There are seven lights to indicate the volume level.
8.
When changing inputs these lights will indicate which
input is active as shown by D1, D2, L1, L2.
9.
The TONE (M-G-S) Mode is indicated to show Music,
Game or Sports Mode.
10.
The HEARING AID Mode is a special mode for
the hearing impaired.
11.
This light illuminates to indicate the power is "On."
INPUT
Cycle through the inputs:
Bluetooth, D1, D2, L1, L2.
D1/D2
Press to select input D1,
press again to select input D2.
L1/L2
Press to select input L1 input,
press again to select the L2 input.
HEARING AID Mode
This listening mode is designed
to improve the sound for the
listening impaired.
NITE Mode
This listening mode activates
AUTO-VOLUME with the first press to
limit program volume peaks and to raise
whispers so they can be heard.
A second press of the NITE button will
turn AUTO-BASS off for the quietest
listening mode possible. A further press
of the NITE Mode button will return to
the normal listening mode.
How to Install Batteries:
1. Use 2 "AAA" batteries.
5
Before using Sound Bar remote
control you must install batteries.
Sound Bar Control Buttons
TOP VIEW
ENERGY STAR
®
Qualified.
Power On/Off
Energy Saving Feature:
If no audio signal is received,
the Sound Bar will automatically
shut off after 30 minutes
to save you energy.
Remote Control
Power On/Off
VOLUME
VOL + (increase)
VOL – (decrease)
MUTE
Press to turn off the volume,
press again to restore the volume.
Bluetooth
®
Press this button to
select the Bluetooth Input.
TONE M-G-S
Music is the default mode, press to
set the TONE for Game TONE Mode,
press again for Sports TONE Mode.
3D/SURR
Press once to activate the 3D Sound
Mode. Press again to activate the
Surround Sound Mode, press again
to return to normal listening.
2. Replace the battery
Caution: Danger of explosion if battery is
incorrectly replaced. Replace only with the
compartment cover.
same or equivalent type. Batteries shall not
be exposed to excessive heat such
as sunshine, fire or the like.
INPUT
VOL–
VOL+
VOLUME
INPUT
VOL + (increase) VOL – (decrease)
Cycle through the inputs:
Bluetooth, D1, D2, L1, L2
Caution: Reduce the unit's volume
before connecting headphones or
other devices to avoid hearing or
speaker damage.
SUBWOOFER
Output
SUB + (increase)
SUB – (decrease)
4/16/12 5:45:32 PM
Advertisement
