Samsung SHR-8080 User Manual page 44

using the DVR
. Select <Format> on the bottom of the screen.
Press <oK> on the "manage" confi rmation window will
start formatting the selected device.
. When the formatting is done, press <oK>.
hdd alarm
You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port,
and its duration.
Using the mouse may help easy setup.
. Use the up/down buttons (▲▼) in <device> window to
move to <storage device>, and press [enter] button.
. Select <hdd alarm>.
A window for setting HDD check and replace output ports
and their durations appears.
. Use direction buttons (▲▼_ +) to move to the desired
item.
Alarm
~
- Alarm signal will output through the alarm out port on the
rear side when selected <1>, <2>, <3>, and <4>.
- If <Beep> was selected, a beep will sound.
- If <all> was selected, both beep sound and alarm signal through rear side ports will output.
~ Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specifi ed alarm
output port.
Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specifi ed
~
alarm output port.
Duration: Sets the alarm duration for the alarm signal and beep sound.
~
- Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4).
- If <Beep> was selected, a beep will sound.
- If <all> was selected, both beep sound and alarm signal through rear side ports will output.
M
`
<Check> status means that the HDD is operating but it has problems that require technical examination.
( ) appears on the Live screen.
`
<Replace> status means that the HDD has defect and requires immediate replacement.
( ) appears on the Live screen.
. When the HDD Alarm setup is done, press <oK>.
_ using the DVR
00769B_SHR-8162_ENG-NEW.indb 44
Storage Device
Format
Device HDD Alarm
Device Select Used/Total
HDD 1 12.28G/499.37G Internal
Manage
Formatting deletes all recordings.
Proceed formatting?
OK Cancel
Format
OK Cancel
Storage Device
HDD Alarm
Device Format
 Check Alarm Output Port 1 2 3
4 BEEP All
 Duration OFF
 Replace Alarm Output Port 1 2 3
4 BEEP All
 Duration OFF
OK Cancel
Usage
2008-12-04 오전 10:15:26