Backlight; White Balance - Samsung SHC-740N/P Instruction Manual

Operating Your Camera

Backlight

The built-in SVIII DSP chip provides intelligent light level control to overcome
the severe Backlight conditions.
1. Press the SET button to display the setup menu and move the arrow
indicator to 'Backlight' using the UP or DOWN button.
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
2. SET 'Backlight' to the desired mode using the LEFT or RIGHT button.
WDR: In case that bright and dark parts exist on the screen at the same time,
your camera allows you to see both parts clearly
OFF: Deactivation
WDR
3. Press the 'SET' button.
• When 'WDR' is chosen, you can adjust the LIMIT.
WDR SETUP
WDR LIMIT
Press SET to Return
You can select the level(LOW,MIDDLE,HIGH).
WDR sensitivity is increased or decreased.
4. When completed, press the SET button.
26
COLOR CCD CAMERA
OFF
WDR
ATW
OFF
LOW
User's Manual
Notes
• If you select manual in 'shutter' menu, you can't use WDR mode.
• If you select WDR mode, the following phenomenon may appear by lighting
condition. In these cases do not select WDR mode.
Noise of bright part on the screen
• According to the area of bright part on the screen there may be the difference of
WDR performance so be sure to adjust the degrees of the visual angle when
installing your camera.
• As you operate WDR LIMIT stronger, noise can be seen more on image.
• For the optimal WDR performance, in case of observing the object that is in the
place of the changing illumination, recommend to use Auto Iris Lens(Video or
DC type, not manual)
White Balance Control
Your camera provides 3 'White Bal.' control modes. You can select the most
suitable one. You can adjust the white balance.
1. Press the SET button to display the setup menu and move the arrow
indicator to 'White Balance' using the UP or DOWN button.
2. Set 'White Bal.' to the desired mode using LEFT or RIGHT button.
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
MOTION DET.
LENS
The four white balance control modes are as follows :
ATW(Auto Tracking White Balance): When color temperature is 1800 ~
10500K, select this mode.
COLOR CCD CAMERA
OFF
WDR
ATW
OFF
DC
27
User's Manual