White Balance; Exposure Compensation - Samsung S1060 User Manual

White balance

Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance set-
ting for a given shooting environment by setting up the custom white
balance.
1. Select the CUSTOM ( ) menu of
the White Balance and place a sheet
of white paper in front of the camera so
that the LCD monitor shows only white.
2. MENU/OK button : selects previous
custom white balance.
Shutter button : saves new custom white balance.
- The custom white balance value will be applied, starting with the
next picture you take.
- The user confi gured white balance will be remain effective until it is
overwritten.

Exposure compensation

This camera automatically adjusts the exposure according to the ambient
lighting conditions.
You can also select the exposure value by using the Fn button.
1. Press the Fn button, and then use the UP
2. Use the LEFT and RIGHT buttons to set the
3. Press the OK or Fn button.
White paper
Compensating Exposure
and DOWN buttons to select the exposure
compensation icon ( ).
desired exposure compensation factor.
The value you set will be saved and the
Exposure Compensation setup mode will be closed. If you change
the exposure value, the exposure indicator (
on the bottom of the LCD monitor.
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor will appear white or you may not get
good pictures.
EV
) will be displayed
RECORDING_
37