Check Every 1000 Hours (Once Two Months)
1-6-2
Cleaning and Lubricating Left and Right Transfer Conveyors
This unit is for carrying in and out the board.
Side cover (2 points)
Left transfer conveyor
Linear bearing for automatic width adjustment
Right transfer conveyor
Linear bearing for automatic width adjustment
Page 1-28
193C-AA00
Trapezoid screw for automatic
width adjustment drive
11DJC2AA
Trapezoid screw for automatic width adjustment
11DKC2AA
1.
Turn off the power.
2.
Remove the side safety cover. (left
and right)
3.
Clean the trapezoid screw and linear
bearing, and apply grease.
[Oil : ALBANIA 2]
1.Trapezoid screw for automatic width adjust-
ment drive
(Oil : ALBANIA 2)
2.Linear bearing for automatic width adjust-
ment
Apply grease to the rail.
193C-E-MMA01-A06-00