Selecting A Signal Source (External A/V) For Pip; Swapping The Contents Of The Pip Image And Main Image; Changing The Pip Channel; Changing The Location (Rotating) The Pip Window - Samsung Tantus TSK 3092WF Owner's Instructions Manual

S
P E C I A L
4.19
C F : S
HAPTER OUR PECIAL
F
E AT U R E S

Selecting a Signal Source (External A/V) for PIP

Press the Source button repeatedly to cycle through all of the
available signal sources:
"TV," "Video 1," "Video 2," "Video 3," "Video 4," "S-Video 1,"
"S-Video 2" and "DVD".

Swapping the Contents of the PIP image and Main image

When you press the Swap button:
The image in the PIP window will appear on the main
screen, and vice versa.

Changing the PIP Channel

Press the PIP CHL or CHM button to change the channel
that appears in the PIP window.

Changing the Location (Rotating) the PIP Window

When you press the Locate button repeatedly, the PIP win-
dow moves from corner to corner on the TV screen.

Changing the Size of the PIP Window

Press the Size button to alternate between a smaller and larg-
er PIP window.

Scanning the Available Channels

This procedure scans all of the
available channels and then stores them in memory.
Press the Scan button, and the memorized channels will
appear in sequence for 2 to 3 seconds per channel.
Press the Scan button again to stop the scanning process.
When the Scan button stops, the viewing mode will return to
its original setting.
F
EATURES
For more information about
external A/V components and sig-
nals, see "Viewing a VCR or
Camcorder Tape" on page 3.17.
If you select "TV", the PIP image is
the same as the main image.