Table of Contents
Advertisement
2-3
Installing the Stand for the Wall Mount
Before installation, disassemble the product according to the following steps.
This product provides a stand mount of 100 mm x 100 mm(200 mm x 100 mm) that complies with the VESA specifications.
Stand Mount
Stand (Optional)
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of
the product faces downwards.
3. Separate the stand.
Installing the Product
Lift up the monitor stand to the maximum angle with your left hand, and remove the back
decoration cover with your right hand, as shown in the figure.
Remove the screw on the point "A".
Remove the part in the direction shown in the figure.
2-3
Advertisement
Table of Contents
