Cisco ASR 9000 Series Configuration Manuallines page 310

Configuring ERP Parameters
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. Use the commit or end command.
DETAILED STEPS
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters L2VPN configuration mode.
Step 3
ethernet ring g8032 ring-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# ethernet ring g8032 r1
Enables G.8032 ring mode, and enters G.8032 configuration submode.
Step 4 port0 interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-erp)# port0 interface GigabitEthernet 0/1/0/6
Enables G.8032 ERP for the specified port (ring port).
Step 5
monitor port0 interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-erp-port0)# monitor port0 interface 0/1/0/2
Specifies the port that is monitored to detect ring link failure per ring port. The monitored interface must be a sub-interface
of the main interface.
Step 6
exit
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
284
configure
l2vpn
ethernet ring g8032 ring-name
port0 interface type interface-path-id
monitor port0 interface type interface-path-id
exit
port1 { interface type interface-path-id | virtual | none}
monitor port1 interface type interface-path-id
exit
exclusion-list vlan-ids vlan-id
open-ring
Implementing Multipoint Layer 2 Services