Using An Image Scanning Application On The Computer - Fujitsu fi-7300NX Operator's Manual

Using an Image Scanning Application on the Computer

This section explains about the basic flow of performing a scan using an image scanning application on the
computer.
In this case, a scanner driver and an image scanning application that supports the scanner driver must be installed
on the computer.
The following scanner driver and image scanning applications are bundled with the scanner:
● Scanner driver
- PaperStream IP driver
● Image scanning application
- PaperStream Capture
- ScanSnap Manager for fi Series
HINT
For details about the scanner driver and image scanning applications, refer to
(page 50).
Scanning procedures, operations, and scan setting items slightly vary depending on the image scanning application
and the scanner driver.
For details, refer to the help for the image scanning application and the scanner driver.
1
Turn on the scanner.
For details, refer to
2
Load a document in the ADF paper chute (feeder).
Load the document face-down in the ADF paper chute (feeder).
For details, refer to
3
Start an image scanning application.
4
Select a scanner driver to be used for scanning.
For some image scanning applications, selection of a scanner driver may not be needed.
How to Turn the Power ON (page
How to Load Documents (page
Overview of the Bundled Software
55).
78).
68
How to Perform a Basic Scan