Configure Static Routes Between Pe-Ce Routers - Cisco NCS 5500 Series Configuration Manuals

Implementing Static Routes

Configure Static Routes Between PE-CE Routers

This task explains how to configure static routing between PE-CE routers.
Note VRF fallback is not supported with IPv6 VPN Provider Edge (6VPE).
SUMMARY STEPS
1. configure
2. router static
3. vrf vrf-name
4. address-family { ipv4 | ipv6 } { unicast | multicast }
5. prefix mask [vrf vrf-name ] { ip-address | interface-type interface- path-id } [ distance ] [ description
text ] [ tag tag ] [ permanent ]
6. commit
DETAILED STEPS
Step 1
configure
Step 2 router static
Example:
RP/0/RP0/CPU0:router(config)# router static
Enters static route configuration mode.
Step 3 vrf vrf-name
Example:
RP/0/RP0/CPU0:router(config-static)# vrf vrf_A
(Optional) Enters VRF configuration mode.
If a VRF is not specified, the static route is configured under the default VRF.
Step 4 address-family { ipv4 | ipv6 } { unicast | multicast }
Example:
RP/0/RP0/CPU0:router(config-static-vrf)# address family ipv6 unicast
Enters address family mode.
Step 5 prefix mask [vrf vrf-name ] { ip-address | interface-type interface- path-id } [ distance ] [ description text ] [ tag
tag ] [ permanent ]
Example:
Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.3.x

Configure Static Routes Between PE-CE Routers

195