Control Panel; Automower ® Connect Menu - Husqvarna AUTOMOWER 550 Operator's Manual

13. When the pairing between the robotic lawnmower
and the charging station has been confirmed, select
Pair to connect the robotic lawnmower to your
Husqvarna account.
14. When the pairing between the robotic lawnmower
and the Husqvarna account has been confirmed,
Enable to activate the theft protection in
select
GeoFence. If GeoFence fails, select
GeoFence on page 31 .
later. See
15. Name your robotic lawnmower, and select
3.10.2 Pairing with the Automower
If the first start-up process already has been carried
through, the next operator follows the normal pairing
process.
The normal pairing process between the Automower
Connect app and the robotic lawnmower involves the
following steps:
1. Download the Automower
Automower
an account. See
2. Log in to your Automower
app.
®
3. Enable Bluetooth mode on your mobile device.
4. Set the Main switch to position
lawnmower.
Note: The robotic lawnmower is available for pairing
for 3 minutes. If pairing has not been successful
within this time period, turn off the robotic
lawnmower (Main switch, position 0). Wait until the
LED indicator lamp goes out, and then set the Main
switch to position 1 again.
My mowers in the Automower
5. Select
and then select the plus sign (+).
6. Select model. The Automower
searching for available robotic lawnmowers within
short-range.
7. Select robotic lawnmower.
8. Enter the PIN code of the robotic lawnmower.
Pair to connect the robotic lawnmower to your
9. Press
Husqvarna account.
10. Name your robotic lawnmower, and select
3.10.3 Guide calibration
When first start-up sequence and pairing have been
carried out, press the START button on top of the
robotic lawnmower. The robotic lawnmower then backs
out of the charging station, and starts to calibrate the
guide wire signal to create as wide guide corridor as
possible. This prevents tracks from forming along the
guide wire. When this is completed, mowing can begin.

3.11 Control panel

®
Automower 520 and Automower
keypad or a display. The commands and settings for the
robotic lawnmower are therefore done in the
®
Automower Connect app. The only command that is
possible to do on the robotic lawnmower is pressing the
START and STOP button.
362 - 002 - 06.02.2018
Skip and try
Done .
®
Connect app
®
®
Connect app and create
® Connect on page 21 .
®
Connect account in the
1 on the robotic
®
Connect app,
®
Connect app is now
Done .
®
550 do not have a
3.11.1 START and STOP button
• The START button on top of the robotic lawnmower
is used to activate the robotic lawnmower.
When pressing the START button, the robotic
lawnmower starts to operate, and the operating mode in
®
Automower Connect is changed to
Dashboard view.
• The STOP button is used to immediately stop the
robotic lawnmower from operating.
When pressing the STOP button, the operating mode in
®
Automower Connect is changed to
Dashboard view.
3.11.2 The LED indicator lamp on the robotic
lawnmower
The LED indicator lamp on the robotic lawnmower
shows the current status:
• Solid green light: The robotic lawnmower is either
mowing the lawn or leaving the charging station.
• Solid blue light: The robotic lawnmower is either
paused or parked, or is searching for the charging
station.
• Solid yellow light: The STOP button on top of the
robotic lawnmower has been pressed.
• Solid red light: The robotic lawnmower has stopped
due to an error.
Note: Clear the error by pressing the STOP button,
and then activate the robotic lawnmower by pressing
the START button.
• Flashing yellow light: The PIN code needs to be
confirmed in the Automower
the robotic lawnmower can be activated.
®
3.12 Automower Connect menu
The main menu in Automower
options:
Dashboard
•
• Map
Settings
•
Messages (only available for Bluetooth short-range
•
connectivity)
3.12.1 Dashboard
The dashboard shows the current status of the robotic
lawnmower both visually and in text. It is very easy to
control the robotic lawnmower by tapping the controls,
Park .
for example
In the lower part of the dashboard there are shortcuts to
Timer settings and the Map . The dashboard also
the
shows symbols according to below:
1. The battery status shows the remaining battery
charge. A flash is shown over the battery symbol
when the robotic lawnmower charges its battery. A
plug is shown over the battery symbol when the
robotic lawnmower is standing in the charging
station without charging.
2. Cutting height.
Mowing in the
Stopped in the
®
Connect app before
®
Connect offers 4
Installation - 23