Workflow for Encryption License Key installation
Use the following process to install the Encryption License Key feature:
1
Verify that your system meets the system requirements.
.
For details, see
2
Enable the Encryption License Key feature.
.
For details, see
2-2.
3
Assign the Security Administrator (View & Modify) role to the
.
administrator who creates, backs up, and restores data encryption license
keys.
For details, see
2-2.
System requirements
The following table lists the system requirements for the Encryption License
Key feature.
Hitachi Virtual Storage Platform
G1000
Hitachi Command Suite
Hitachi Device Manager -
Storage Navigator
SVP (Web server)
Host platforms
Data volumes
Disk adapter
Enabling the Encryption License Key feature
To enable the Encryption License Key feature:
2-2
Hitachi Virtual Storage Platform G1000 Encryption License Key User Guide
System requirements on page
Enabling the Encryption License Key feature on page
Enabling the Encryption License Key feature on page
Item
•
•
•
•
To connect to the key management server by
specifying the host name instead of IP address, you
need the DNS server settings. For SVP configuration,
give your service representative the IP address of the
DNS server.
All open-systems and mainframe host platforms are
supported.
All volume types and emulations are supported: open-
systems, mainframe, and multiplatform.
Supported volumes: Internal
A disk adapter that provides data encryption.
Encryption License Key Installation
2-2.
Requirement
Microcode 80-01-2x and later.
Encryption License Key software license
Security Administrator (View & Modify) role to
enable or disable data encryption and to back up
or restore keys
Storage Administrator (provisioning) role to format
volumes