Alert Settings - Hitachi LP-AW4001 User Manual

3.1 Projector Web Control (continued)

3.1.6 Alert Settings

When changing the settings, click the [Apply]
projector.
This setting can be restored to the initial setting when clicking the [Reset] button.
Item
Alarm Time *1
SNMP Trap *2
Send Mail
Mail Subject *3
Mail Text *4
*1 Only Filter Time Alarm.
*2 The setting item of Cold Start and Authentication Failure is SNMP Trap only.
*3 The text length can be up to 100 alphanumeric characters and symbols. Using
*4 The text length can be up to 1024 alphanumeric characters and symbols. Using
Click the [Enable] check box to enable SNMP Trap
alerts.
Click the [Enable] check box to enable e-mail alerts.
Description
3. Web Control
51