Samsung GH68-22573A User Manual page 44

• To discard your changes, press
exiting without saving your changes. Press the Yes soft key to
discard your changes.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
Wait — Stops the calling sequence until the phone receives further
•
input.
2-Sec Pause — Stops the calling sequence for two seconds, then
•
sends the remaining digits.
Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
To add pauses to a Contacts entry number, do the following:
Find the Contacts entry associated with the number you
1.
want to include one or more pauses. (For more
information, refer to "Finding a Contacts Entry" on
page 37.)
41
. You are prompted to confirm Select and edit the desired number. (For more information,
2.
refer to "Editing a Contacts Entry" on page 40.)
Press Options. The following pause options appear in the
3.
display:
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
Select the pause option of your choice to add it to the
4.
number sequence.
When you're finished entering information, press
5.
store the number to Contacts.
Pause Dial from Contacts
If you stored the number using 2-second pause(s), simply
1.
find the Contacts entry, highlight the number, and press
. (For more information, refer to "Finding a Contacts
Entry" on page 37.)
If you stored the number using Wait(s), find and dial the
2.
number from Contacts and wait for the appropriate prompt
from the dialed number.
3. Press to resume dialing the number.
to