Lenovo W520 User Manual

Bluetooth Headset W520
Enjoy the extraordinary flexibility of
®
Lenovo Bluetooth Headset W520
User Guide
Safety Information Parts and locations
 Long-term exposure to high-volume
sounds might result in serious hearing
damage.
 For your safety, do not use the headset
under risky conditions, such as when
you are driving or riding.
Ear buds
Next button
Previous button
LED indicators
Flexible wrap
Power button
Micro USB connector (for charging)
Microphone
Volume-down button (-)
Volume-up button (+)
Note: Ensure that you distinguish the left
and right ear buds when you use the
headset.
Turn off the headset
Pairing the headset
Press and hold the power button for 4
seconds until the red LED flashes once.
Before using your Lenovo Bluetooth
Headset W520 (hereinafter called
Re-pair after a disconnection
headset), pair it with a mobile phone,
Press the power button.
computer, or other device. To pair the
Turn up the volume
headset, first ensure that it is powered off.
Press the volume up (+) button.
Then, press and hold the power button for
about 6 seconds until the red and blue LED
Turn down the volume
indicators flash alternately. Enable the
Press the volume down (-) button.
Bluetooth function on the pairing device,
Answer an incoming call
and pair with "Lenovo W520."
Press the power button.
Reject an incoming call
Using the headset
Press and hold the power button for 2
seconds.
After the headset is paired with a device, it
is ready for your use. You can take the
End a call
following operations:
Press the power button.
Turn on the headset
Make the most recent call again
Press and hold the power button for 3
Press the power button twice.
seconds until the blue LED flashes twice.
Mute or unmute
Press and hold either the volume up (+)
button or volume down (-) button for 2
seconds.
Switch voice between the headset and
your phone during a call
Press the power button twice.
Pause or resume music play
Press the power button.
Switch to the previous track
Press the Previous button.
Switch to the next track
Press the Next button.
LED indicators
The LED indicators on the headset flash in
varied ways to indicate different working
states of the headset.