Advertisement
Quick Links
Operation Diagnoses
The Parking Aid has self-testing function after power-on, if all the
sensors are functioning, it will beep once, otherwise, it will beep 3 times
to indicate that one or more sensors are damaged.
Detection Ranges
1)1.7m detecting range
Note:
All centre sensors have the same detection range of 0-170cm, but
the corner sensors are limited to 0-95cm.
If the system is tailor made, please refer corresponding specs.
Specification
Voltage
Ultrasonic Frequency
Working Temperature
Buzzer Sound Level
Detection Distance
8
5Z-RSSMSA03-09 V2.0
To Display
12VDC
40kHz
o
o
5
-30 C ~ +8 C
>80dB
170cm
Parking Aid
Fitting Instructions
Model: RS-4-18-R-I
Advertisement
Summary of Contents for C-KO RS-4-18-R-I
- Page 1 Detection Ranges Fitting Instructions 1)1.7m detecting range To Display Model: RS-4-18-R-I Note: All centre sensors have the same detection range of 0-170cm, but the corner sensors are limited to 0-95cm. If the system is tailor made, please refer corresponding specs.
- Page 2 Important Notice i. Insert the positive(or negative) wire of the reverse light into the wire connector, and press the metal connector down Parking Aid is strictly meant as a drivers’ aid when parking or Metal backing up your vehicle, it does not remove the driver's Wire connector responsibility to ensure normal safety procedures when reversing.
- Page 3 c Use the right size hole saw to cut holes Installation Note: We recommend professional fitting by an approved professionals so as to ensure no mistakes are made, as there require holes to be cut in the rear bumper or bodywork. d Deflash the hole by a cutter ①...
- Page 4 ② Position ECU and Buzzer What does the kit consist of ? The Reverse Parking Aid contains everything you need for a quick and a. Find a waterproof place for the ECU inside the rear luggage successful installation: compartment; > ECU(Electronic control unit) b.