Dell Dimension 9200 Service Manual page 87

Documentation
1. Follow the procedures in
2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3. Remove the computer cover (see
4. Remove the drive panel (see
5. Remove the drive panel insert (see
6. Remove the Media Card Reader from its packaging. Remove the shoulder screws from the inside of the drive-panel
insert and attach the screws to the new drive.
1 Media Card Reader
7. Gently slide the drive into place until you feel a click or feel the drive securely installed.
Ensure that the Media Card Reader is installed before the USB cable is connected.
8. Connect the USB cable to the back of the Media Card Reader and to the USB connector on the system board (see
System Board Components).
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (40 of 68) [12/9/2007 11:22:24 PM]
Before You Begin.
Removing the Computer Cover).
Removing the Drive Panel).
Removing the Drive-Panel
2 shoulder screws (4)
Insert).