Table of Contents
Advertisement
154577/2683-220 IC
5/17/02
Combination Blade- For general-purpose ripping and cutting.
Chisel Tooth Combination- Specially designed for general-purpose ripping
and crosscutting.
Framing/Rip Combination- For facing, roofing, siding, sub-flooring,
framing, form cutting.
Cross Cut Blade- For smoother, faster cross cutting.
Ripping Blade- Fast for rip cuts.
Plywood Blade- For smooth cuts in plywood. Reduce splintering.
Planer Blade- For very smooth ripping and cross cutting.
Flooring Blade- For sawing where nails may be occasionally encountered.
Metal Cutting Blade- For cutting aluminum, copper and other soft metals.
Friction Blade-For cutting corrugated, galvanized sheets.
Carbide Tipped Blade- For longest sawing without blade sharpening. Cuts
wood, transite, cemesto board, asbestos, formica, masonite, and similar
materials.
1:47 PM
Page 12
ACCESSORIES
Recommended accessories for use with your tool are available at extra cost
from your distributor or your local service center. A complete listing of
service centers is included with your tool.
CAUTION: The use of any non-recommended accessory may be hazardous.
If you need any assistance in locating any accessory, call 1-800-9-BD TOOL
(1-800-923-8665) or contact Black & Decker, Consumer Services
Department, 626 Hanover Pike, P.O. Box 618, Hampstead, MD 21074.
RIP FENCE: Attaches to top of saw shoe. Permits rip cuts without a penciled
guide line.
SAW PROTRACTOR: Guides saw for accurate cut-off work. Adjusts from
0 to 70 degrees.
12
Advertisement
Table of Contents
