Table of Contents
Advertisement
Analog TV Out
You can set the component or composite video output to match the TV you have connected.
PRECHECK!
• Using the Component/AV Cable provided with your camcorder, connect the camcorder to your TV. page 119~123
• This HD camcorder provides the two-in-one component/AV cable that fits the purpose of the component and the AV
cable. Therefore, when using the component/AV cable, you must check the right method for the TV output by setting
the "Analog TV Out" menu.
1.
Touch the Menu (
Touch a desired submenu item.
2.
• Check the TV type, connection jack, and the resolution
of the recorded video before you choose the desired
submenu item.
3.
To exit the menu, touch the Exit ( ) or Return (
Submenu items
• Component Auto(
): The video signals are output in the same format as the recorded file. Use this setting only when
connecting to an HDTV.
• Component 480p(
): The recorded file is output in the 720x480P format. Use this setting only when connecting to a regular
TV which supports the progressive scan at the SD(Standard Definition) level by using the component(Y/Pb/Pr, AUDIO) jacks.
): The recorded file is output in the 720x480i format. Use this setting only when connecting to a regular
• Component 480i(
480i
TV which only supports the SD(Standard Definition) resolution without the progressive scan by using the component(Y/Pb/Pr,
AUDIO) jacks.
• Composite(
): The composite video signals are output via the Component/AV cable (green). Use this setting only when
connecting to a regular TV that has no component video jacks.
• The Analog TV Out indicator is displayed only when the camcorder is connected to a TV.
• For details on TV specification, refer to the user manual of the connected TV.
• Although the "Analog TV Out" is set to "Component 480p," the component video signal
is output as interlaced format if the resolution is set to [HD]1080/60i.
Default Set
You can restore all menu settings to the default conditions.
1.
Touch the Menu (
• A message appears asking for your confirmation.
2.
Touch "Yes" if you want all the settings return to the
default.
• The Time Zone screen appears after all settings return
to the default.
Set the date and time again. page 35
3.
• Do not turn off the power while using this function.
• Initializing the HD camcorder settings to factory defaults
does not affect recorded images.
) Setting ( ) tab "Analog TV Out."
) Setting ( ) tab "Default Set."
PC Software
USB Connect
TV Type
5 / 7
Analog TV Out
) tab.
TV Connect Guide
TV Display
REC Lamp
6 / 7
Default Set
Default Set?
TV Connect Guide
All settings return to default.
TV Display
REC Lamp
6 / 7
Default Set
90
MIN
90
MIN
90
MIN
YES
NO
105
Hide quick links:
Advertisement
Table of Contents
