Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the slots on the system fan with the rubber grommets on chassis.
2
Route the rubber grommets through the slots on system fan and pull the rubber
grommets until the fan snaps into position.
3
Connect the system-fan cable to the system board.
4
Place the computer in an upright position.
Post-requisites
Replace the
right-side
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
67