Advertisement
Refer to the numbered drawings that relate
to the numbered paragraphs
Contents
Introduction
The User Manual contains useful information for the user on
how to work correctly and in complete safety, and is designed
to make it easier to use the machine (called "machine" or "ap-
pliance" below).
What follows is in no case intended to be a long list of warnings
and constraints, but rather as a series of instructions meant to
improve the service provided by the machine in every respect,
and particularly to avoid a series of injuries or damage to equi-
pment that might result from inappropriate procedures for use
and management.
It is essential that all the people responsible for transporting,
installing, commissioning, using, maintaining, repairing or dismant-
ling the machine should consult this manual and read it carefully
before proceeding with the various operations, in order to avoid
any incorrect or inappropriate handling that might be result in
damage to the machine or put people's safety at risk.
Introduction
1.
DESCRIPTION
1
• This professional food processor / emulsifi er can be used in
the preparation of minces, blends and emulsions, in particular
in a hospital environment, in gourmet catering and in dietetics.
It can also be used as a food processor / mixer by removing the
scraper for grinding or kneading the hardest of products.
• For special preparations which do not come under the scope
of food: (PLEASE CONTACT US)
A Removable bowl-lid scraper handle with
centre pourer hole
1.
1
Installation
Machine storage: -25°C to +50°C
Ambient temperature during operation: +4°C to +40°C
This machine is for professional use and must be used by staff trained to use, clean and maintain it, in terms or reliability and
safety.
Use the machine in adequately lit premises (See applicable technical standard for the country of use. In Europe, refer to standard
EN 12464-1)
When handling the machine, always check that the parts taken hold of are not mobile elements: risk of dropping and injury to the
lower limbs.
The machine is not designed for use in explosive atmospheres.
2.
DIMENSIONS - WEIGHT (INDICATION ONLY)
1
A Gross packaged weight (Kg)
B Net weight (Kg)
C Packaging dimensions (mm): L x W x H
2.
POSITION
2
• Stand the appliance on a working surface (table, base, etc.)
of a height of between 700 and 900 mm. Its 4 pads provide it
1
1
Parts list - exploded view
2
4
Electrical diagrams
4
It is just as important that the Manual should always be available
to the operator and it should be kept carefully where the machine
is used ready for easy and immediate consultation in case of any
doubt, or in any case, whenever the need arises.
If after reading the Manual, there are still any doubts concerning
how to use the machine, please do not hesitate to contact the
Manufacturer or approved After Sales Service provider, who
is constantly available to ensure quick and careful service for
improved machine operation and optimum effi ciency.
Note that the safety, hygiene and environmental protection stan-
dards currently applicable in the country where the machine is
installed must always be applied during all phases of machine
operation. Consequently it is the user's responsibility to ensure
that the machine is operated and used solely under the optimum
safety conditions laid down for people, animals and property.
B Removable transparent lid with centre pourer hole
C Lid locking handle
D Bowl handle
E Bowl (capacity 4.5, 5.5 or 7 litres depending on model)
F Casing
G Non-slip pads
H Body
I Power supply lead
J Control panel
K Locking pin
ATTENTION!!
2.
1
D Machine dimensions: L x W x H (mm)
E Space required for opening and removal: L1 x W x H1
(mm)
with perfect stability.
• It does not need to be fi xed and can easily be moved.
1
GB
01/2008
4
5
A
M
K45-55-70 GB 01 08
Hide quick links:
Advertisement
